BDC Network

JUNE 8, 2024

8 ways to cool a factory 0 qpurcell Sat, 06/08/2024 - 10:00 Industrial Facilities Whichever way you look at it—from a workplace wellness point of view or from a competing for talent angle—there are good reasons to explore options for climate control in the factory workplace. The US manufacturing sector is booming.

Heavy Equipment Manufacturing 121

Heavy Equipment Manufacturing Fire Protection System Installation Building Materials Manufacturing HVAC System Installation 121

Construction Specifier

JULY 16, 2024

Typically, air curtains come in rectangular or modern contoured cabinets installed over the inside (and sometimes outside) of door openings. They are economical, easy-to-install, carry short paybacks in energy savings, and provide an effective means of preventing wildfire smoke ingress through building doorways.

HVAC System Installation 59

HVAC System Installation HVAC Systems Energy Conservation Energy Efficiency 59

Job Order Contracting

JANUARY 4, 2022

Installed model and features of each system. Manufacturer’s schedule for routine preventive maintenance, inspections, condition monitoring (predictive tests) and adjustments required to ensure proper and economical operation and to minimize repairs. Provide instructions stating when the systems should be retested.

Maintenance 90

Maintenance Electrical Wiring Installation HVAC System Installation Warranty 90

CCR Magazine

AUGUST 15, 2024

Monthly checks should include testing smoke detectors, inspecting electrical cords for wear, and checking under sinks for leaks. Making sure your pool’s filtration system is working correctly will also extend the life of your pool and keep the water pristine.

Fire Protection System Installation 52

Fire Protection System Installation HVAC System Installation Fire Protection Systems HVAC Systems 52

CCR Magazine

AUGUST 29, 2024

Steam systems serve as the backbone of numerous industrial processes, providing the essential thermal energy required for a wide range of applications across various sectors. From powering machinery in manufacturing facilities to sterilizing equipment in healthcare settings, the importance of steam cannot be overstated.

Energy Efficiency 52

Energy Efficiency HVAC System Installation Foundation Systems Piping Installation 52

CCR Magazine

AUGUST 3, 2023

“Convection heaters provide warmth and heat to a specific area or room by circulating air and heating it using a highly efficient electric element,” explained Andrew Martin, Manager of Product Management with Marley Engineered Products. Working in tandem with Technical Air Systems, Inc.,

Millwork 52

Millwork HVAC System Installation Flooring Systems Electrical Systems 52

Job Order Contracting

DECEMBER 21, 2021

What if each building system component where not only identified and associated with the following information, but also linked to an associated detailed and locally researched unit price book with associated labor, material, equipment costs and productivity information? Electrical (ELEC), Heating Ventilation, Air Conditioning (HVAC).

Maintenance 95

Maintenance Building Materials Manufacturing HVAC System Installation Controls Manufacturing 95

GCP Applied Technologies

DECEMBER 11, 2018

DUCTILCRETE® engineered slab systems significantly reduce control joints and curling. Verify that the HVAC systems are sited properly. It’s not uncommon for warehouses to have rooftop HVAC units, but this leaves the equipment exposed to extreme temperatures and weather. Consider lighting needs.

Maintenance 60

Maintenance HVAC System Installation Fire Protection System Installation HVAC Systems 60

Construction Specifier

JUNE 25, 2024

For decades, buildings have relied on intumescent materials for fire control. These applications range from fireproofing of structural steel, through-penetration firestopping of mechanical and electrical service, perimeter edge sealing of fire doors, to joint and gap sealing to limit fire spread.

Fire Protection System Installation 59

Fire Protection System Installation Fire Protection Systems Building Code Compliance Building Codes 59

Autodesk Construction Cloud

JANUARY 17, 2022

Project commissioning, also referred to as Cx, is a series of milestones that includes the testing of systems, materials, and staff who will be operating the systems. In general, the LEED building commissioning process is a highly effective method to improve the performance of building systems and equipment.

Building Commissioning 84

Building Commissioning Handover Renewable Energy Systems Building Information Modeling (BIM) 84

Buildern

MAY 4, 2023

These guidelines cover everything from how structures are designed to the electrical systems, plumbing, fire safety measures, and even accessibility. Have everything under control with a flexible hierarchical folder system that can be accessed from any device.

Fire Protection System Installation 52

Fire Protection System Installation Electrical Wiring Installation HVAC System Installation Heavy Lifting Transportation 52

The Pro Builder

JUNE 5, 2023

consumers are increasingly discovering and embracing smart appliances, systems, and innovations in their homes, and building products manufacturers are continuing to bring new and better smart home and home automation products to market. And that market continues to grow , with no signs of slowing.

HVAC System Installation 245

HVAC System Installation Electrical Wiring Installation Building Automation Building Controls 245

CK Power

DECEMBER 15, 2020

No matter what happens, we make sure their backup power systems are ready to power life-safety critical equipment. It requires a team of experts to customize a long-lasting, dependable system within budget. We work closely with clients to create a system designed around their facility and operations. Budgeting is everything.

Electrical Wiring Installation 21

Electrical Wiring Installation HVAC System Installation Electrical Systems HVAC Systems 21

CivilJungle

MAY 28, 2021

Manufacturing refers to production of comparable items with no particular purchaser, while construction occurs on a location for a known client. Electrical and Plumbing. The ordinary construction scheme is to embrace a foremost priority on cost control or schedule control. To inaugurate a coding system. Plastering.

Building Performance Measurement 52

Building Performance Measurement Building Materials Manufacturing Building Permits Project Management Consulting 52

Civil + Structural Engineer

JANUARY 8, 2024

Of particular focus were enhancements to the buildings’ electrical, mechanical and wastewater infrastructure while maintaining consistency with the site’s original zoning. This project exemplifies innovation, flexible design and creative repositioning,” said Lori Ambrusch, Director, Science & Technology for Ware Malcomb.

HVAC System Installation 130

HVAC System Installation Energy Efficiency Real Estate Development Electrical Systems 130

Building Information Management

JULY 2, 2012

Open information exchange of Heating, Ventilating and Cooling systems (HVACie), released by the Engineer Research and Development Center for public review. HVACie extends the existing Industry Foundation Class Coordination View including equipment and system information streamlining construction shop drawing and fabrication.

HVAC Systems 40

HVAC Systems HVAC System Installation Building Information Modeling (BIM) Construction Equipment 40

Building Information Management

JULY 2, 2012

Open information exchange of Heating, Ventilating and Cooling systems (HVACie), released by the Engineer Research and Development Center for public review. HVACie extends the existing Industry Foundation Class Coordination View including equipment and system information streamlining construction shop drawing and fabrication.

HVAC Systems 40

HVAC Systems HVAC System Installation Building Information Modeling (BIM) Construction Equipment 40

Roads Online

JUNE 20, 2024

Image/Coates From maintaining thermal comfort and personal safety, to enabling manufacturing, building and industrial processes, many businesses rely on temperature-controlled environments. This is where heating systems can be used as a safety line to meet production deadlines.”

HVAC System Installation 84

HVAC System Installation Electrical Systems Controls Manufacturing Cost Control 84

CivilJungle

NOVEMBER 19, 2020

The materials used for the manufacturing of sealants are the often chemical compounds, both organic or inorganic. Due to many reasons, in inadequate dewatering, faults in plumbing system etc., Later, drying oils have been used for the manufacture of oil-based putty, which also acts as an efficient sealant.

Building Materials Manufacturing 52

Building Materials Manufacturing Waterproofing Systems Concrete Pouring Building Materials 52

The Korte Company

AUGUST 17, 2018

Electric lights are getting more efficient, but they still account for between 25% to 45% of a building’s energy use. Another green construction principle to consider is the types of lights to install. And equipping spaces with motion sensors that only turn on the lights when someone’s nearby dramatically reduces electrical costs.

Green Building 40

Green Building Building Materials Manufacturing Wall Systems HVAC System Installation 40

Job Order Contracting

SEPTEMBER 12, 2018

Application: This standard card applies to automatic hydraulic security Bollards/Barricades found at driveway entrances, and other areas where vehicular traffic must be controlled. Preventive maintenance services should be performed by a qualified manufacturer’s service representative. Review manufacturer’s instructions.

Maintenance 40

Maintenance Fire Protection System Installation Fire Protection Systems Electrical Wiring Installation 40

CivilJungle

OCTOBER 18, 2021

Then after architect consult with a structural engineer and MEP engineer for details of the reinforcements and other detail for use, how deep your foundation will be, the size of gravel to be used, column width, electrical, plumbing, etc. The warranty for appliances and materials are obtained from manufacturers and supplier.

Painting/finishing 98

Painting/finishing Electrical Wiring Installation Plumbing Systems Building Permits 98

CCR Magazine

SEPTEMBER 12, 2023

the leading manufacturer and innovator of air curtains, introduced the Architectural Icon 8 and Icon 10 to its Architectural Collection of air curtains. The air curtain is programmed and operated through Berner’s industry-leading, factory-installed Intelliswitch digital control platform. Berner International , New Castle, Pa.,

Energy Conservation 52

Energy Conservation HVAC System Installation Controls Manufacturing Architecture 52

Construction Specifier

JULY 25, 2024

Left unaddressed, this moisture can migrate into various areas of the structure, including into the roofing system, leaving materials wet and deteriorating. Therefore, understanding water vapor transmission and condensation is the first step in the process of controlling construction moisture.

Roofing Systems 59

Roofing Systems Construction Management Concrete Pouring Wall Systems 59

Bylt News

SEPTEMBER 6, 2023

The design includes a transportation hub with stops for rental electric scooters, LAZ Parking vans to Bradley International Airport, and CTfastrak buses connecting to an upgraded greenway. The nature of this project entails the need for infrastructure improvements and upgrades for roofing, electrical, HVAC, plumbing, flooring and painting.

Infrastructure Development 52

Infrastructure Development Fire Protection System Installation Real Estate Development Historic Preservation 52

Autodesk Construction Cloud

NOVEMBER 1, 2022

Shawn Brennan, Continental Electrical Construction Company. Matt Allread, Gaylor Electric, Inc. Brian Harlow, Interstate Electrical Services . Corey Coleman, Piquette & Howard Electric Service, LLC. Controller, Braun & Butler Construction, Inc. Siddharth Kothari, Clayco Inc. Jose Galindo, Huckabee.

Building Information Modeling (BIM) 122

Building Information Modeling (BIM) Project Management Consulting Project Management Construction Management 122

Building Information Management

JULY 27, 2016

The MasterFormat numbering system and titles provide a common, transparent manner to readily communicate construction item, tasks, and associated information. Divisions are the top Level (Level 1) in the hierarchy of the classification system. Electrical Resistivity Investigations Information. 00 62 19 Infection Control Form.

Fire Protection System Installation 45

Fire Protection System Installation Fire Protection Systems Collaboration Heavy Equipment Manufacturing 45

Building Information Management

JULY 27, 2016

The MasterFormat numbering system and titles provide a common, transparent manner to readily communicate construction item, tasks, and associated information. Divisions are the top Level (Level 1) in the hierarchy of the classification system. Electrical Resistivity Investigations Information. 00 62 19 Infection Control Form.

Fire Protection System Installation 45

Fire Protection System Installation Fire Protection Systems Collaboration Heavy Equipment Manufacturing 45

Revit OpEd

APRIL 14, 2016

Last night I was able to download and install Building Design Suite 2017 from my Autodesk subscription account. We'll be able to create indented lists with a bit more control now and we can place just a leader (empty text). They've added control over Fields, Filters, Sorting/Grouping, and Formatting. has finally been tackled.

Steel Fabrication 75

Steel Fabrication Schedule Management Piping Installation Wall Systems 75

Building Information Management

JULY 26, 2016

AIEE: American Institute of Electrical Engineers. CJ: Control Joint. CONT: Continuous, Continue, Control. CTSC: Communications Systems Terminal Cabinet. EIFS: Exterior Insulation and Finish System. ELEC: Electrical. ELECT: Electrical. EP: Electrical Panelboard, Explosion Proof. AGG: Aggregate.

Painting/finishing 40

Painting/finishing Fire Protection System Installation Electrical Wiring Installation Fire Protection Systems 40

Building Information Management

JULY 26, 2016

AIEE: American Institute of Electrical Engineers. CJ: Control Joint. CONT: Continuous, Continue, Control. CTSC: Communications Systems Terminal Cabinet. EIFS: Exterior Insulation and Finish System. ELEC: Electrical. ELECT: Electrical. EP: Electrical Panelboard, Explosion Proof. AGG: Aggregate.

Painting/finishing 40

Painting/finishing Fire Protection System Installation Electrical Wiring Installation Fire Protection Systems 40

Job Order Contracting

JANUARY 13, 2017

AIEE: American Institute of Electrical Engineers. CJ: Control Joint. CONT: Continuous, Continue, Control. CTSC: Communications Systems Terminal Cabinet. EIFS: Exterior Insulation and Finish System. ELEC: Electrical. ELECT: Electrical. EP: Electrical Panelboard, Explosion Proof. AGG: Aggregate.

Painting/finishing 40

Painting/finishing Fire Protection System Installation Electrical Wiring Installation Fire Protection Systems 40

Contractors Liability Blog

MARCH 9, 2022

Any work contractually undertaken by a general contractor in the nature of electrical contracting, plumbing, conditioned air contracting, low voltage contracting, or utility contracting may not be performed by the general contractor but shall only be performed by a person who is duly licensed to perform such work. of enclosed space.

Insurance Management 52

Insurance Management General Contracting Building Permits Specialty Contracting 52

Building Information Management

APRIL 24, 2016

Projects may be architectural (finishes) , electrical, mechanical and/or plumbing in nature. The electrical may consist of, but not be limited to, demolition and construction of building electrical systems and may include service and distribution, general lighting, communications, controls and instrumentation, and other systems.

Contracts 60

Contracts General Contracting Building Materials Manufacturing Insurance Management 60

Work Gearz

OCTOBER 5, 2020

One-touch LED controller with (3) heat settings. The one touch LED controller has 3 heat settings and the battery gives back up for around 6 hours. They have in-built stereo system to listen to music while work or take calls as the in-built Bluetooth gets connected to any Bluetooth enabled device. Washer and dryer safe.

Building Products Distribution 40

Building Products Distribution Site Planning Fire Protection System Installation Change Management 40

CCR Magazine

MAY 11, 2024

The interior had experienced deterioration of plaster, mold growth, and rusting mechanical systems. In the 10-foot, 8-inch tall, white corridor connecting the bedroom to the reading room and bathroom, a collection of etchings by Brice Marden, collected by Johnson and Whitney, are now re-installed after being in storage since 2009.

Historic Preservation 52

Historic Preservation Steel Fabrication Electrical Wiring Installation Site Planning 52