The Pro Builder

APRIL 22, 2023

Rather, it employed an off-site construction method that built all of the wall panels, floor panels, and roof trusses in a nearby factory and assembled them on site in fewer than three days. Agorus' framing package for Daybreak included premade floor systems, each panel specifically engineered for its application in the system.

Building Information Modeling (BIM) 246

Building Information Modeling (BIM) Modular Construction Building Materials Manufacturing Flooring Systems 246

Construction Specifier

JANUARY 26, 2025

By preventing uncontrolled air movement between conditioned and unconditioned spaces, they help regulate indoor temperatures, control moisture, and improve energy efficiency. Uncontrolled air movement through penetrations in the building enclosure can increase energy costs as HVAC systems work harder to condition the air.

Building Code Compliance 64

Building Code Compliance Building Performance Measurement HVAC System Installation Fire Protection System Installation 64

The Pro Builder

OCTOBER 4, 2023

Prefab, Modular Homebuilder Touts Energy and Cost Benefits qpurcell Wed, 10/04/2023 - 09:00 Dvele —a California-based manufacturer of prefab, modular homes—got started by bringing two building concepts together: high performance and factory construction. That high degree of factory completion helps ensure cost and quality control, Weiss says.

Building Resilience 264

Building Resilience Modular Construction Building Automation Flooring Systems 264

GCP Applied Technologies

AUGUST 26, 2020

While some folks commonly think of precast as grey concrete, used for sewer systems or structural elements, it can also be used to construct entire buildings, including schools, office structures, and condominiums. This includes building enclosure systems that must provide aesthetic value. Integrated systems. Phillip.fry@gc….

Structural Systems 148

Structural Systems HVAC Systems Plumbing Systems Building Codes 148

Civil + Structural Engineer

NOVEMBER 11, 2024

BC.GE, Nicholson Construction, was recognized for her outstanding service as co-chair of the DFI Structural Slurry Wall and Seepage Control Committee, lead for the USACE-DFI Seepage Control Task Force and organization of the 2023 Workshop in Denver, and organization of a special committee production at IFCEE 2024.

Foundation Systems 130

Foundation Systems Controls Manufacturing Geotechnical Engineering Wall Systems 130

UK Construction Blog

MARCH 13, 2025

Twin-wall polycarbonate panels provide excellent thermal efficiency with 80-85% light transmission, creating stable growing conditions year-round whilst reducing energy costs by up to 40%. The panels come in two primary types: twin-wall (double layer) and single-wall construction.

Wall Systems 52

Wall Systems Structural Systems Foundation Systems Building Materials Manufacturing 52

UK Construction Blog

MARCH 14, 2025

An upgraded electrical system supports your maintenance activities effectively. Install wall-mounted pegboards or slatwall systems to hang frequently used tools within easy reach. Air Compressor and Pneumatic System A reliable air compressor powers essential pneumatic tools for efficient vehicle maintenance.

Maintenance 52

Maintenance Fire Protection System Installation Heavy Lifting Transportation Fire Protection Systems 52

The Pro Builder

JANUARY 2, 2024

Their collaboration enables homeowners or builders to select from Hereabout’s list of preexisting, ready-to-use design plans, then build the home using B.PUBLIC’s prefab floor, roof, and wall panels. Manufacturing the panels in climate-controlled factories also results in 95% less waste and 30% faster home construction, per B.PUBLIC.

Building Performance Measurement 264

Building Performance Measurement Building Materials Manufacturing Modular Construction Building Codes 264

Construction Specifier

JANUARY 13, 2025

In response, door manufacturers are developing engineering and design features to serve a broader range of commercial environments. Designers can use the fifth wall for elements of interest. The size flexibility gives designers greater freedom, allowing them to integrate sectional doors that entirely or partially open up a wall.

Energy Efficiency 59

Energy Efficiency Building Materials Manufacturing Ceiling Systems Energy Conservation 59

Civil + Structural Engineer

DECEMBER 6, 2023

Visitors are invited to stay as long as they wish and are offered several amenities, including computers, scanners, printers, a kitchenette with seating, lockers, a meeting room, a classroom, an interactive video wall, gallery, and all-gender restrooms, all intended to provide a welcoming and comfortable environment.

Historic Preservation 201

Historic Preservation Flooring Systems Roofing Systems Wall Systems 201

UK Construction Blog

MARCH 26, 2025

Key Takeaways Construction defects commonly stem from design deficiencies, poor workmanship, substandard materials and inadequate quality control, potentially reducing property values by up to 25%. Foundation cracks, wall collapses, and uneven settling occur frequently in residential and commercial properties.

Electrical Wiring Installation 52

Electrical Wiring Installation HVAC System Installation Fire Protection System Installation Plumbing Systems 52

Construction Specifier

NOVEMBER 4, 2022

When designing and building high-profile high-rises, a unitized curtain wall system is often the favored facade solution, for more reasons than just highlighting the skyline. The benefits of this approach range from manufacturing, quality control, onsite installation speed, and enhanced water resistance.

Wall Systems 52

Wall Systems Structural Systems Controls Manufacturing Building Design 52

Construction Specifier

DECEMBER 21, 2020

Prefabricated wall panels are individually manufactured in an offsite fabrication shop, complete with exterior cladding and fenestration, anchor system, water/air/vapor barrier(s) and flashing, insulation , and the structural framing. Images courtesy Simpson Gumpertz & Heger. by Annemarie R. DerAnanian, PE, and Mary K.

Prefabrication 98

Prefabrication Wall Systems Building Materials Manufacturing Structural Systems 98

BDC Network

JUNE 8, 2024

8 ways to cool a factory 0 qpurcell Sat, 06/08/2024 - 10:00 Industrial Facilities Whichever way you look at it—from a workplace wellness point of view or from a competing for talent angle—there are good reasons to explore options for climate control in the factory workplace. The US manufacturing sector is booming.

Heavy Equipment Manufacturing 121

Heavy Equipment Manufacturing Fire Protection System Installation Building Materials Manufacturing HVAC System Installation 121

Construction Specifier

NOVEMBER 28, 2024

These include columns, joists, purlins, load-bearing walls, floor slabs, and foundations. These include architectural and MEP systems, furniture, fixtures, equipment, and other contents. describes test methods to evaluate the components of the overall glazing system. Figure 3: AAMA 501.4 Photo courtesy AAMA 501.4,

Building Performance Measurement 52

Building Performance Measurement Wall Systems Building Code Compliance Structural Systems 52

Civil + Structural Engineer

JANUARY 23, 2024

Panel Built’s modular products became more durable and more efficient to manufacture, thanks to a switch to smooth steel. Fire Rated Wall Panels For workplaces that deal with flammable materials, fire-rated walls are a must-have. Blairsville, Georgia : Panel Built Inc. The smooth steel panels are available now. ”

Wall Systems 130

Wall Systems Structural Systems Controls Manufacturing Quality Control 130

Civil + Structural Engineer

DECEMBER 7, 2023

The company wanted a bespoke electric-powered winch lifting system to raise and lower large vinyl-type sheets in a purpose-built ‘wet area’. The customer can operate all four winches individually via their own wall-mounted, low-voltage pendant controls, allowing the lifting of a single vinyl sheet as required at any time.

Electrical Systems 130

Electrical Systems Electrical Wiring Installation Flooring Systems Lifts 130

UK Construction Blog

MARCH 4, 2025

The post The Art of Modern Staircase Manufacturing: Precision Engineering Meets Bespoke Design appeared first on UK Construction Blog. Using state-of-the-art CNC machinery and digital controls, today’s stair manufacturers can transform even the simplest sketch into a comprehensive plan tailored to your exact specifications.

Staircases 52

Staircases Building Materials Manufacturing Engineering Controls Manufacturing 52

Construction Specifier

DECEMBER 29, 2021

In the 20 th century, wall assemblies discretized into multi-layered systems with each playing a distinct role. Over time, designers developed various wall configurations to provide thermal mass and weather protection suitable to particular building and climate parameters. Photo courtesy David E. By David E. Image courtesy PIMA.

Wall Systems 98

Wall Systems Building Materials Manufacturing Fire Protection Systems Building Codes 98

BD+C

JUNE 17, 2013

To quantify the illuminance and energy consumption levels achieved by increasing the ceiling’s light reflectance (LR), ceiling system manufacturer Armstrong World Industries commissioned Brinjac Engineering to conduct two controlled studies. Illuminance is a measure of the intensity of light on a unit area of a surface.).

Ceiling Systems 77

Ceiling Systems Wall Systems Building Automation Building Commissioning 77

Construction Specifier

OCTOBER 1, 2024

Curtain wall systems are ever present in today’s commercial construction marketplace. The architectural design of curtain walls must be developed alongside increasing demand for high-performing, energy-efficient solutions. Jackson, AIA Photo courtesy Simpson Gumpertz & Heger Inc.

Wall Systems 104

Wall Systems Fire Protection System Installation Project Management Consulting Steel Fabrication 104

Civil + Structural Engineer

MARCH 18, 2024

PEX: State-of-the-Art for Potable Water; Historical Overview of Discontinued PB Piping Materials Also Examined IRVING, Texas – A new technical document that addresses the critical differences between crosslinked polyethylene (PEX) tubing systems with polybutylene (PB) systems has been published by the Plastics Pipe Institute, Inc.

Plumbing Systems 130

Plumbing Systems Plumbing Piping Installation Wall Systems 130

CCR Magazine

FEBRUARY 17, 2025

the innovative world leader in building envelope solutions, including wall cladding systems, air barriers, coatings, and restoration systems, announces the launch of StoVentec Fiber Cement Rainscreen System , a complete ventilated rainscreen cladding system that blends sustainability, design freedom, and performance.

Fire Protection System Installation 52

Fire Protection System Installation Fire Protection Systems Wall Systems Energy Efficiency 52

Construction Specifier

MARCH 14, 2024

has posted a new document addressing construction-generated moisture and its impact on commercial roofing systems. the trade association for the manufacturers of single-ply roofing systems and related component materials, has posted a new document addressing construction-generated moisture and its impact on commercial roofing systems.

Roofing Systems 103

Roofing Systems Concrete Pouring Painting/finishing Structural Systems 103

Wolgast Corporation

JUNE 14, 2023

Precast Concrete Wall Panel Options for Construction Efficiency Construction efficiency is a critical factor that can significantly impact timelines and overall project success. Wall panel system construction is gaining popularity due to its labor and time savings to erect a building envelope.

Concrete Pouring 91

Concrete Pouring Wall Systems Building Materials Manufacturing Structural Systems 91

Roads Online

SEPTEMBER 1, 2024

The use of a durable concrete sleeper retaining wall that sits behind timber panels, has helped to preserve the authentic appearance of Ballarat’s famous Sovereign Hill. Historically, the Museum used timber for its retaining walls, to align with the 1850s gold rush era aesthetics. Images: National Precast.

Historic Preservation 105

Historic Preservation Concrete Pouring Wall Systems Controls Manufacturing 105

BD+C

MARCH 31, 2023

Voice of the Brand When hurricanes, tornados, extreme temperatures, snow and ice, or salty ocean air have the potential to impact a structure, it is critical to design a building envelope system that will protect the occupants from the elements and deliver a comfortable environment.

Zoning 105

Zoning Fire Protection System Installation Fire Protection Systems Building Performance Measurement 105

UK Construction Blog

MARCH 4, 2025

From simple DIY projects like painting walls in light colours to installing affordable storage solutions that maximise vertical space, you can create a functional, visually appealing extension of your living space. Create specific zones for tools, gardening equipment, sports gear and automotive supplies to establish a logical system.

Electrical Wiring Installation 52

Electrical Wiring Installation Material Storage Flooring Systems Ceiling Systems 52

Commercial Construction Blog

MARCH 27, 2018

Prefabricated elements such as pre-cast concrete walls, which Englewood installed for a Blain’s Farm & Fleet store in Romeoville, Ill., Labor Costs: Labor in a shop or manufacturing facility is usually cheaper than labor on a job site. Look at the installation of pre-cast concrete walls.

Modular Construction 109

Modular Construction Prefabrication Millwork Building Materials Manufacturing 109

The Pro Builder

OCTOBER 25, 2023

The New American Home (TNAH) 2023 not only showcases stunning design and views of the Las Vegas Valley but also serves as a model of high performance in home design, from the home's natural resource efficiencies and renewable energy systems to the healthy, comfortable indoor environment it provides for its owners.

Energy Efficiency 130

Energy Efficiency Renewable Energy Systems HVAC System Installation Sustainability 130

Civil + Structural Engineer

NOVEMBER 1, 2023

Prior to this, tension fabric structures had typically relied upon hollow-tube, web truss framing systems. Where fabric becomes advantageous by comparison, however, is that the cost to clad a building with polyvinyl chloride (PVC) fabric walls is much less than constructing masonry walls or using other “conventional” materials.

Steel Fabrication 130

Steel Fabrication HVAC System Installation Structural Systems Fire Protection System Installation 130

BDC Network

MAY 29, 2024

Compelling Conversations: Panelized Walls for Multifamily Projects 1 kcichowicz Wed, 05/29/2024 - 10:37 Learn why a Colorado-based framing contractor favors panelized walls over traditional framing in APA’s Compelling Conversations. Ross Cohen explains why the company prefers panelized walls to other framing methods.

Wall Systems 105

Wall Systems Building Code Compliance Site Planning Quality Control 105

BD+C

MARCH 20, 2023

Prefabricated building elements can help shorten construction schedules, improve quality control, and provide safer working conditions, making them an attractive option. This can be attributed to the fact that prefabricated building elements are made in a controlled factory, so recycling and waste reduction are simplified.

Prefabrication 128

Prefabrication Sustainability Modular Construction Renewable Energy Systems 128

Construction Specifier

FEBRUARY 18, 2021

Building owners, facility managers, architects, specifiers, product manufacturers, and tenants are expressing an increased interest in paints and coatings offering microbial control. canopies, doors, and entry systems. The need for microbial control stems from the fact that there are an estimated 4.5 Photo © Adobe Stock.

Architecture 98

Architecture Painting/finishing Building Controls Controls Manufacturing 98

CCR Magazine

APRIL 9, 2025

Fronek dedicated 43 years to Wausau Window and Wall Systems, a subsidiary of Apogee Enterprises. Rob Luter Image Courtesy of: FGIA Luter served as a crucial leader within the manufactured housing segment of FGIA, supporting collaboration with the Department of Housing and Urban Development (HUD) regarding the 1700 series standards.

Controls Manufacturing 52

Controls Manufacturing Wall Systems Communication Collaboration 52

BD+C

MARCH 22, 2023

This is enough to make anyone involved in construction projects anxious, but health systems face a host of additional pressures. Most notably, an aging population is driving an increased demand for services, and healthcare systems need to take steps now in order to meet those needs. WHAT’S ONSITE PREFABRICATION? AND WHY DO IT?

Prefabrication 97

Prefabrication Wall Systems Structural Systems Building Materials Manufacturing 97

Construction Specifier

NOVEMBER 29, 2024

Depending on the manufacturer, hybrid carpet is available in rolls and/or tiles and with or without a factory-applied adhesive. Seams are chemically welded during installation to create a wall-to-wall impermeable moisture barrier. It is important to review manufacturer instructions prior to installation. for installation.

Flooring Systems 59

Flooring Systems Building Resilience Building Performance Measurement Environmental Impact Assessment 59