Remove Curing Remove Flooring Systems Remove Plumbing Systems
article thumbnail

APPLYING SPRAY FOAM INSULATION ON AND AROUND PLASTIC PIPES

Civil + Structural Engineer

PPI and SPFA recommend that when there are plastic pipes and fittings in a wall, ceiling, or floor cavity, the SPF installer should apply one layer of foam until it touches the pipe but does not encase the pipe. The spray polyurethane foam curing reaction is exothermic,” explained Richard Duncan, Ph.D., layer) thickness installed.

article thumbnail

Black Buffalo Hits Print on First Internationally Code Compliant 3D-Printed Home

The Pro Builder

Once the walls are printed with proprietary Planitop 3D “ink,” three and a half times stronger than traditional concrete, electrical and plumbing fixtures will be mounted on the interior of the walls for ease of repairs, should they arise in the future. It cures quicker and stronger than CMU (cinder block/concrete) walls in a matter of days.

Insiders

Sign Up for our Newsletter

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.

article thumbnail

What Is Concrete Topping | Topping Slab Definition | Types of Topping Slab | Advantages & Disadvantage of Topping Slab

CivilJungle

It is nothing but placing a layer of concrete over the existing slab in order to give a finished floor surface on the old layer of concrete. Concrete topping slabs are usually applied on top of the structural floors in order to provide a finished floor surface. It provides a level surface to the floor.

article thumbnail

All About Transportation of Concrete | What Is Transportation of Concrete | Methods for Transportation of Concrete

CivilJungle

Mortar pan is a very common type of transportation system of concrete, and it is widely used in small construction sites where the concrete requirement is less. In this system, concrete does not lose its workability. In this system, the one thing you need to remember that the fall height of the concrete. Mortar Pan.

article thumbnail

What Is Concrete Topping | Topping Slab Definition | Types of Topping Slab | Advantages & Disadvantage of Topping Slab

CivilJungle

It is nothing but placing a layer of concrete over the existing slab in order to give a finished floor surface on the old layer of concrete. Concrete topping slabs are usually applied on top of the structural floors in order to provide a finished floor surface. It provides a level surface to the floor.

article thumbnail

What Is Sunken Slab | Advantages & Disadvantages Sunken Slab

CivilJungle

The sunken slab is one of the familiar and adaptable ways to maintain architectural design in especially the washroom, as well as laundry areas where water drainage systems or pipes installed below the floor or tiles. Furthermore, all pipe systems remain below the floor. All plumbing pipes are concealed inside the slab.

article thumbnail

The Start of Celebration: the 2023 Yearbook of Engineering Achievement

Civil + Structural Engineer

It features elements that maximize the safety, security, and efficiency of the travel process including 100 percent automated screening lanes, 100 percent facial recognition “e-gates” for international departure, an innovative landside terminal design, and 100 percent trackable RFID Independent Carrier System.