Construction Specifier

APRIL 9, 2025

percent embodied carbon savings compared to the regional industry average 28-day standard-cured compressive strength, rising to as much as 68 percent with specific applications in the building. With the strategic selection of project areas for a 56-day curing schedule, the team was able to minimize impacts on the construction time and cost.

Energy Efficiency 59

Energy Efficiency Renewable Energy Systems Green Building Building Design 59

GCP Applied Technologies

DECEMBER 11, 2018

These flexible membranes are hand or spray applied onto surfaces such as balconies, podium decks and green roofs. Seamless — Liquid applied waterproofing cures to form one solid membrane, so there are no seams or joints, which are the most common areas where waterproofing tends to fail. . Play. . .

Waterproofing Systems 74

Waterproofing Systems Fire Protection System Installation Roofing Systems Fire Protection Systems 74

Construction Specifier

JANUARY 18, 2021

While past pandemics led to design advancements in city planning and urban improvements, infectious diseases transmitted through aerosols can also be impacted by appropriately designed and installed mechanical and enclosure systems. Figure 1: Potential air paths through roof assembly. Images © Ryan Asava, AIA, NCARB.

Roofing Systems 98

Roofing Systems Building Controls Wall Systems Building Design 98

GCP Applied Technologies

DECEMBER 11, 2018

These flexible membranes are hand or spray applied onto surfaces such as balconies, podium decks and green roofs. Seamless — Liquid applied waterproofing cures to form one solid membrane, so there are no seams or joints, which are the most common areas where waterproofing tends to fail. .

Waterproofing Systems 74

Waterproofing Systems Fire Protection System Installation Roofing Systems Fire Protection Systems 74

UK Construction Blog

MARCH 11, 2025

Without a system that can monitor water flow in real time, sites are highly vulnerable to these risks and weve found that two in every three sites without such a system will report water damages. This system enables automatic water flow monitoring and the ability to shut off the supply. Clearly, its a major problem.

Fire Protection System Installation 52

Fire Protection System Installation Fire Protection Systems Insurance Management Risk Management 52

Construction Specifier

OCTOBER 1, 2020

Many challenges associated with sheet membrane waterproofing systems, such as ‘fish mouths,’ uneven seams, difficult end lapping, and complexity of installing a straight flat sheet on a polygonal structure, are eliminated in a fluid-applied system. However, coal tar was limited to low-slope roofs due its low viscosity.

Waterproofing Systems 98

Waterproofing Systems Roofing Systems Structural Systems Building Materials 98

Specification Product Update

AUGUST 17, 2023

Victoria Ramwell, commercial manager at cold-applied liquid waterproofing specialist, Kemper System, explains the benefits of using Poly Methyl methacrylate ( PMMA) as a liquid applied waterproofing membrane, and offers specification advice. Advantages of PMMA As well as quick curing, PMMA is durable, flexible and hard wearing.

Waterproofing Systems 52

Waterproofing Systems Roofing Systems Curing Controls Manufacturing 52

Construction Specifier

NOVEMBER 28, 2023

Polyurea coatings offer rapid curing times, high tensile strength, and exceptional adherence to different substrates. Polyurea coatings protect roofs, decks, and basements from water and leaks, forming a moisture barrier that extends the life of structures.

Waterproofing Systems 59

Waterproofing Systems Curing Structural Systems Roofing Systems 59

GCP Applied Technologies

FEBRUARY 18, 2021

When it comes to waterproofing horizontal decking applications such as concrete balconies and covered roofs, there are a number of options available. When it comes to waterproofing horizontal decking applications such as concrete balconies and covered roofs, there are a number of options available.

Waterproofing Systems 78

Waterproofing Systems Roofing Systems Structural Systems Curing 78

Specification Product Update

APRIL 8, 2024

Victoria Ramwell, commercial manager at cold-applied liquid waterproofing specialist, Kemper System, explains the benefits of using Poly Methyl methacrylate ( PMMA) as a liquid applied waterproofing membrane, and offers specification advice. Advantages of PMMA As well as quick curing, PMMA is durable, flexible and hard wearing.

Waterproofing Systems 52

Waterproofing Systems Curing Roofing Systems Controls Manufacturing 52

Specification Product Update

FEBRUARY 16, 2024

Victoria Ramwell, commercial manager at cold-applied liquid waterproofing specialist, Kemper System, explains the benefits of using Poly Methyl methacrylate ( PMMA) as a liquid applied waterproofing membrane, and offers specification advice. Advantages of PMMA As well as quick curing, PMMA is durable, flexible and hard wearing.

Waterproofing Systems 52

Waterproofing Systems Curing Roofing Systems Controls Manufacturing 52

Specification Product Update

DECEMBER 22, 2023

Victoria Ramwell, commercial manager at cold-applied liquid waterproofing specialist, Kemper System, explains the benefits of using Poly Methyl methacrylate ( PMMA) as a liquid applied waterproofing membrane, and offers specification advice. Advantages of PMMA As well as quick curing, PMMA is durable, flexible and hard wearing.

Waterproofing Systems 52

Waterproofing Systems Curing Roofing Systems Controls Manufacturing 52

Specification Product Update

OCTOBER 13, 2023

Victoria Ramwell, commercial manager at cold-applied liquid waterproofing specialist, Kemper System, explains the benefits of using Poly Methyl methacrylate ( PMMA) as a liquid applied waterproofing membrane, and offers specification advice. Advantages of PMMA As well as quick curing, PMMA is durable, flexible and hard wearing.

Waterproofing Systems 52

Waterproofing Systems Curing Roofing Systems Controls Manufacturing 52

CivilJungle

OCTOBER 5, 2022

Mortar pan is a very common type of transportation system of concrete, and it is widely used in small construction sites where the concrete requirement is less. In this system, concrete does not lose its workability. In this system, the one thing you need to remember that the fall height of the concrete. Mortar Pan.

Concrete Pouring 52

Concrete Pouring Curing Roofing Systems Flooring Systems 52

CivilJungle

JANUARY 29, 2022

Generally, concrete slabs, concrete foundations , beam, column, wall, roof, etc., Cast-in-place concrete slabs, concrete foundations, beam, column , wall, roof, etc., Cast in place concrete wall is an exposed civil, structural system. This lateral system includes a shear wall, moment-resisting frame, braced frame, etc.

Concrete Pouring 52

Concrete Pouring Foundation Systems Wall Systems Curing 52

CCR Magazine

MAY 16, 2024

This creates an ideal environment for mold and mildew growth, premature deterioration of roofing materials and insulation, and potential health risks due to poor indoor air quality. This is because a cooler attic reduces the heat radiating down into your living space, making your air conditioning system work less. According to E.W.

Roofing Systems 52

Roofing Systems HVAC System Installation Structural Systems Piping Installation 52

Flynn

JULY 13, 2022

4 Guidelines for Preventive Roof Maintenance. Benjamin Franklin wasn’t an authority on roof maintenance, but his wisdom may apply. He famously wrote that an ounce of prevention is worth a pound of cure. Ben was referring to preventing fires, but the same holds true for most other threats to building systems, including the roof.

Maintenance 52

Maintenance Roofing Systems Fire Protection Systems Structural Systems 52

GCP Applied Technologies

DECEMBER 11, 2018

Liquid applied waterproofing membranes are typically spray or hand applied onto a substrate, and cure to form a solid material. Liquid applied waterproofing is often used on terraces, podium decks and green roofs. Vegetative roofing systems. for podiums, balconies, roof decks and plant rooms). 2012 and AS 4654.2-2012.

Waterproofing Systems 60

Waterproofing Systems Fire Protection System Installation Roofing Systems Fire Protection Systems 60

CivilJungle

DECEMBER 9, 2021

Introduction of Dutch Gable Roof. The Dutch gable roof is also called a gablet that consists at the top of a roof of a small gable. In this type of gable roof, two sloping sides peak at the top center. By the Dutch gable roof, we can get a combination of hip roof and gable roof.

Roofing Systems 52

Roofing Systems Wall Systems Ceiling Systems Waterproofing Systems 52

CivilJungle

JANUARY 2, 2022

What Is Skillion Roof ? The Skillion roof is a unique type of roof which has just one unvarying isolated surface. The characteristics of this type of roof are crucial than regular smooth tents. The main difference between a standard roof and a Skillion roof is the perpendicular pitch or rise. Butterfly Roof.

Roofing Systems 52

Roofing Systems Foundation Systems Building Materials Manufacturing Structural Systems 52

UK Construction Blog

MARCH 4, 2025

For structural assessments, it’s worth consulting a professional to evaluate the soundness of foundations, walls, and roof before proceeding with major changes. Create specific zones for tools, gardening equipment, sports gear and automotive supplies to establish a logical system.

Electrical Wiring Installation 52

Electrical Wiring Installation Material Storage Flooring Systems Ceiling Systems 52

CivilJungle

APRIL 21, 2022

What Is a Roof Vent? Completely, roof ventilation is a system that promotes air to ventilate via the vent. Roof vents are essential to every house. Yet not multiple homeowners comprehend much concerning their roof ventilation strategies. Roof vents may not be something you require to suppose, but they should be.

Roofing Systems 52

Roofing Systems Electrical Wiring Installation Structural Systems Ceiling Systems 52

Construction Specifier

OCTOBER 1, 2021

Metal coils are unwound, cleaned, pretreated, and given a series of coating layers ( i.e. primer, backer, and topcoat) before being thermally cured and recoiled for shipment. Common coil coated products used in construction include roofing, wall panels, soffits, and fascia. The most current version of the rating system, LEED v4.1,

Green Building 52

Green Building Architecture Building Materials Manufacturing Energy Efficiency 52

CCR Magazine

JUNE 4, 2024

With this in mind, comprehensive air barrier systems are becoming the new norm for creating sustainable, high-performing commercial buildings. An air barrier is a system of materials that controls movement of air through the walls and roof of a building. What Is an Air Barrier? </p>

HVAC System Installation 52

HVAC System Installation HVAC Systems Wall Systems Structural Systems 52

Construction Specifier

SEPTEMBER 19, 2024

By understanding the challenges and following best practices, such as ensuring material compatibility, detailed planning, and rigorous quality control, contractors, developers, and specifiers can ensure their air barrier systems designs are effective and durable. Accurately predicting rooftop surface temperature extremes is valuable.

Waterproofing Systems 52

Waterproofing Systems Building Materials Manufacturing Roofing Systems Building Materials 52

CCR Magazine

DECEMBER 13, 2024

Do you need to refresh and protect your metal roof? Our guide on how to paint a metal roof will cover all the steps, from gathering the right tools to ensuring safety and applying the finishing touches. Key Takeaways Painting a metal roof is an effective way to extend its life, enhance energy efficiency, and improve aesthetic appeal.

Painting/finishing 52

Painting/finishing Roofing Systems Energy Efficiency Material Handling 52

CCR Magazine

OCTOBER 31, 2023

Next, we removed a piece of the slab to expose the void and pumped in thousands of pounds of Strata-Fill, a slow rising foam that expands then cures in place to fill the void and stabilize the soil.” Krayem adds, “We used video of the injection process to make sure the void was completely filled, then sprayed from the outside.”

Heavy Equipment Manufacturing 52

Heavy Equipment Manufacturing Curing Roofing Systems Foundation Systems 52

CivilJungle

JANUARY 16, 2021

Bamboo is a natural product which is widely used in the construction of partition walls floorings and ceiling panels and for roofing. Bamboo is the best option for the roofing material and widely used by the people in the construction of structures especially where bamboo is in abundance. Bamboo Uses in Construction. Short Note.

Architecture 69

Architecture Building Materials Roofing Systems Material Handling 69

CivilJungle

DECEMBER 28, 2020

Also, Read: What Is Soil Vent Pipe | How Does Soil Stack Pipe Works | Soil Vent Pipe Material | Types of Plumbing System. In this time the concrete needs curing to get its actual strength. There are many curing methods are used, those are pond curing, spray curing, wet jute bag curing, etc. Types of Frame.

Concrete Pouring 52

Concrete Pouring Foundation Systems Structural Systems Wall Systems 52

CivilJungle

DECEMBER 26, 2021

Introduction of Roof Storm Damage Checklist. Generally, a roof is replaced after thirty years; in the real world, there are so many things that can damage your roof and repair , or inspection work is needed. In America, there is a huge problem due to storms where roof repair work is required. Types of Roof Storm Damage.

Roofing Systems 52

Roofing Systems Inspection Piping Installation Building Code Compliance 52

CivilJungle

MARCH 13, 2021

New technologies involve Shotcrete used for the new Austrian tunnelling system, by use of a tunnel boring machine (TBM) or even a tunnelling shield. Vertical walls with arch roof type. Tunnels shield the system (railway track, highway, sewage line , oil line, respectively.) Polycentric. Sequential Excavation Method.

Roofing Systems 52

Roofing Systems Structural Systems Concrete Pouring Curing 52

Work Gearz

OCTOBER 16, 2020

And it might take up to a week’s time to cure. Curing and drying are two different things. Curing is a chemical process that can take longer and can take place even in the presence of water. Curing might even take place till 28 days and can continue throughout the lifespan of the concrete.

Concrete Pouring 52

Concrete Pouring Curing Flooring Systems Painting/finishing 52

Construction Specifier

JUNE 17, 2024

At the same time, the built environment must adapt to the impacts of an already-changing climate by optimizing the resiliency of structural systems. As the demand for water continues to grow, internally cured concrete 6 is becoming a go-to solution for mitigating and adapting to climate change impacts.

Sustainability 105

Sustainability Building Resilience Environmental Impact Assessment Building Materials Manufacturing 105

GCP Applied Technologies

AUGUST 1, 2019

The expectation of ‘complete dryness’ called for a waterproofing system with a long-standing successful track record in difficult and harsh conditions. In addition, the tight construction schedule necessitated a system with a rapid application speed and cure time. Roofing underlayments. read more. . return to top. .

Waterproofing Systems 60

Waterproofing Systems Fire Protection Systems Wall Systems Building Design 60

Construction Specifier

JULY 5, 2021

T-SLAB takes precast concrete floor systems to the next level. Last summer, Tindall announced the launch of an innovative precast concrete floor system called the Tindall Superior Lightweight All-Purpose Beam (T-SLAB). Watch the video below for a quick look at the innovation behind this new slab system. T-SLAB at a glance.

Flooring Systems 52

Flooring Systems Structural Systems Wall Systems Roofing Systems 52

Construction Specifier

OCTOBER 4, 2021

Last summer, Tindall announced the launch of an innovative precast concrete floor system called the Tindall Superior Lightweight All-Purpose Beam (T-SLAB ® ). Designed with architects, engineers, and contractors in mind, this new slab system entered the market with the power to revolutionize the way designers and builders think about precast.

Flooring Systems 52

Flooring Systems Structural Systems Wall Systems Roofing Systems 52

Construction Specifier

FEBRUARY 10, 2025

Spenser Simis Photos courtesy Simpson Gumpertz & Heger (SGH) and Nate Holyoke Builders Closed-cell spray polyurethane foam (ccSPF) insulation is used in exterior roof and wall assemblies to effectively combine air/vapor/thermal barrier and sometimes weather barrier (Figure 1). By Rachel Lynde, P.E., Niklas Vigener, P.E.,

Building Materials Manufacturing 52

Building Materials Manufacturing Building Performance Measurement Controls Manufacturing Building Materials 52