CivilJungle

JANUARY 5, 2021

Structural Audit Definition. Structural Audit can be defined as a very important approach to understanding the distress level or condition of any existing civil engineering structure or a building. Structural Audit of Residential Building.

Building Performance Measurement 52

Building Performance Measurement Structural Systems Painting/finishing Building Codes 52

CivilJungle

MARCH 2, 2021

Definition Spillway-. “Spillways are structural elements construct to provide safe release of floodwaters from the dam toward a downstream region” Types of Spillway: There are many various spillways which can be given based on the appropriateness of the location as well as other criteria. . Ogee Spillway. Chute Spillway-.

Structural Systems 52

Structural Systems Wall Systems Foundation Systems Plumbing Systems 52

CivilJungle

AUGUST 9, 2020

Concrete topping slabs are usually applied on top of the structural floors in order to provide a finished floor surface. Topping Slab Definition. Also, read: What Is Plumbing | Systems of Plumbing | Difference Between One pipe, Two Pipe, Single Stack, and Single Stack Partially Ventilated | How to Choose of Plumbing System.

Flooring Systems 52

Flooring Systems Curing Plumbing Systems Foundation Systems 52

CivilJungle

MARCH 24, 2021

A retaining wall is a design of a structure ; it is built when there is a desired change in ground elevation and to resist the lateral pressure of soil that exceeds the repose angle of the soil. To provide stability against overturning reinforced concrete walls on the spread , the foundation is gravity structures.

Wall Systems 97

Wall Systems Concrete Pouring Foundation Systems Structural Systems 97

CivilJungle

DECEMBER 11, 2020

Ferrocement is a homogeneous structure which has more Tensile strength and compressive strength as compared to Reinforced cement concrete. Ferrocement is an innovative construction material which is readily available because of Its easy construction method it is suitable for construction of various structures. Plaster to the Structure.

Steel Fabrication 98

Steel Fabrication Waterproofing Systems Structural Systems Curing 98

CivilJungle

OCTOBER 18, 2021

Then after architect consult with a structural engineer and MEP engineer for details of the reinforcements and other detail for use, how deep your foundation will be, the size of gravel to be used, column width, electrical, plumbing, etc. Structural Certificate. Foundation. Floor Slab or Roof Structure.

Painting/finishing 98

Painting/finishing Electrical Wiring Installation Plumbing Systems Masonry 98

CivilJungle

FEBRUARY 17, 2021

Spandrel Beam Definition-. In concrete as well as steel construction , spandrel beams are load-bearing beams which attach to just the support columns along the circumference of the structure. These systems will support the wall as well. Spandrel beams have extra support on the outside walls of a multi-storey structure.

Wall Systems 52

Wall Systems Flooring Systems Foundation Systems Structural Systems 52

Building Radar

SEPTEMBER 9, 2024

It helps reduce greenhouse gas emissions and creates energy-efficient structures that benefit both developers and the environment. These documents often include information on electrical, plumbing, and structural changes. Defects can cause long-term issues like water intrusion, structural failures, or energy inefficiencies.

General Contracting 52

General Contracting Building Code Compliance Building Materials Manufacturing Project Management 52

Building Information Management

MARCH 20, 2013

Standardized “Glossary” terms, acronyms, definitions. Capital planning and management systems (CPMS) – physical and functional condition monitoring and associated capital reinvestment planning. Computer-Aid Facility Managements Systems (CAFM) – space planning, move management, space utilization.

Building Information Modeling (BIM) 55

Building Information Modeling (BIM) Integrated Project Delivery (IPD) Facility Management Building Standards 55

CivilJungle

SEPTEMBER 26, 2020

The temporary structure used to support a permanent structure, material , plant, equipment, and people until the construction of the permanent structure has advanced to the stage where it is self-supporting. Falsework includes the foundations , footings , and all structural members supporting the permanent structural elements.

Foundation Systems 52

Foundation Systems Structural Systems Roofing Systems Fire Protection System Installation 52

Building Radar

AUGUST 8, 2024

Retrofitting in construction involves updating and modifying existing structures to improve their performance, safety, and energy efficiency. Understanding Retrofitting Definition and Overview Retrofitting is the process of upgrading or improving an existing building or structure to enhance its performance or extend its lifespan.

Building Code Compliance 52

Building Code Compliance HVAC System Installation Energy Efficiency Structural Systems 52

CivilJungle

JANUARY 29, 2022

Generally, concrete slabs, concrete foundations , beam, column, wall, roof, etc., are preferred structures in cast-in-situ concrete. Definition of Cast in Place Concrete. Cast-in-place concrete slabs, concrete foundations, beam, column , wall, roof, etc., are preferred structures in cast-in-situ concrete.

Concrete Pouring 52

Concrete Pouring Foundation Systems Wall Systems Curing 52

CivilJungle

DECEMBER 28, 2020

Sometimes this concrete frame is also called as a skeleton of this entire structure. In this structure, the vertical members, i.e. columns, carry the entire load of the building , so it’s the most important part of this type of construction. Precast concrete frame structures are used in one storey building. Foundation.

Concrete Pouring 52

Concrete Pouring Foundation Systems Structural Systems Wall Systems 52

CivilJungle

JANUARY 20, 2021

The flexbow incorporated in the riser pipe acts as an adjustable valve which serves two purposes, firstly it controls the flow of water and air entering the Well Point system, and secondly it allows others to have a clear view of what is being pimped. A Well Point system consists of several closely spaced shallow wells of small diameter.

Piping Installation 52

Piping Installation Foundation Systems Plumbing Systems Wall Systems 52

CivilJungle

JANUARY 16, 2021

Bamboo is widely used in the construction industry for various purposes such as scaffolding construction of bridges and structures etc. Bamboo is widely used for the construction of partition walls and beams which are the main structural elements of any structure. Hence, it is also known as structural bamboo.

Architecture 69

Architecture Building Materials Roofing Systems Material Handling 69

Roads Online

SEPTEMBER 27, 2023

This lack of a system discourages designers and contractors from using secondary materials due to potential risks and liabilities. The other issue is related to the current definition of waste and its reuse, which in some states is subject to strict EPA regulations limiting the capacity to recycle materials.

Building Materials 105

Building Materials Safety Regulations Risk Management Building Standards 105

CivilJungle

JANUARY 20, 2021

Introduction of Foundation: Foundation is one of the most important parts of the building. The foundation plays a crucial role in the structure and it is the lowermost part of the building below the ground level which provides a base for the structure. Location of the Foundation. Settlement of Foundation.

Foundation Systems 52

Foundation Systems Structural Systems Wall Systems Painting/finishing 52

CivilJungle

JANUARY 12, 2021

Introduction of Pile Cap: The pile cap is a type of thick concrete mat-like structure which rests on the pile (timber or concrete) which gives a stable foundation to the whole system. The similar structure of the pile cap is a raft foundation, where there is also a concrete block -like structure is constructed.

Foundation Systems 52

Foundation Systems Painting/finishing Structural Systems Building Design 52

CivilJungle

FEBRUARY 6, 2021

The word Monolithic means “all in a single pour” so in construction where Monolithic Slab is used the foundation is made in one single pour that is made up of a layer of a concrete slab with thicker area under the load-bearing walls and all the edges of the perimeter to replace the footer. What Is a Monolithic Slab? What Is a Floating Slab?

Concrete Pouring 52

Concrete Pouring Foundation Systems Wall Systems Flooring Systems 52

CivilJungle

JANUARY 7, 2021

It is often utilised in tunnels, underground walls, retaining walls, drainage systems & swimming pools for interim support. Also, Read: What Is Pad Foundation | Failure of Pad Foundation | Pad Foundation Detail | Types of Pad Foundation | Design of the Pad Footing Depends on Several Factors.

Concrete Pouring 52

Concrete Pouring Fire Protection System Installation Wall Systems Foundation Systems 52

CivilJungle

MARCH 7, 2021

This is not a typical type of foundation. Inverted Arch Footing is built between the two foundation walls. An Inverted Arch Footing is a civil engineering structure in the form of a modified arch, inverted in comparison with a standard arch footing. Such footing was used at The Iron Bridge in the 1970s.

Foundation Systems 52

Foundation Systems Wall Systems Structural Systems Waterproofing Systems 52

CivilJungle

MARCH 14, 2021

The spread footing is utilized to support the column & walls and additionally to convey & disseminate the load coming to the structure to the soil below it. The base of spread footing is slightly wider than load-bearing foundation base. This is also called a stepped spread foundation. Raft Foundation or Mat Foundation.

Foundation Systems 52

Foundation Systems Concrete Pouring Wall Systems Structural Systems 52

CivilJungle

MARCH 23, 2021

The pile and the piers are two different types of deep foundations which are widely used in the construction. It is necessary that you should know the difference between a pile foundation and a pier foundation. In this article, you will get to know the difference between the Pier and Pile foundation. What Is Pier?

Foundation Systems 52

Foundation Systems Staircases Structural Systems Wall Systems 52

BIM & Beam

AUGUST 1, 2018

This is the third blog post in a series that discusses the advantages of working on concrete projects in a BIM process for structural engineers. Segmentation is dictated by engineering, architectural, or fabrication requirements, and its reinforcement is determined by the structural engineer. Revit-model-driven structural-analysis.

Building Information Modeling (BIM) 75

Building Information Modeling (BIM) Structural Systems Building Codes Steel Fabrication 75

UK Construction Blog

OCTOBER 18, 2023

The development of reinforced concrete dates back to the 19th century, as engineers and architects sought a construction material that could withstand both the compressive and tensile forces in structures. Reinforced concrete is now widely used across the globe for a variety of structural applications, including buildings, bridges, and more.

Concrete Pouring 64

Concrete Pouring Building Materials Manufacturing Building Materials Building Products Distribution 64

CCR Magazine

MARCH 20, 2024

The Anchors Ensure the Safety and Stability of Portable Temporary Structures Many industries utilize portable, modular, or temporary structures or buildings due to the speed, flexibility, and cost-effectiveness advantages offered by this approach over permanent facilities.

Structural Systems 52

Structural Systems Building Codes Safety Regulations Foundation Systems 52

CivilJungle

MARCH 17, 2021

The Frost wall or frost-protected wall structure is built to keep soil below the building against freezing to secure the foundations in freezing conditions. Any damage to the structural foundation would have an effect on the overall integrity of the construction. What Is Frost Wall?

Wall Systems 52

Wall Systems Foundation Systems Structural Systems Concrete Pouring 52

CivilJungle

OCTOBER 24, 2021

What is a Raft Foundation? A raft foundation , also called a raft foundation , is essentially a continuous slab resting on the soil that extends over the entire footprint of the building, thereby supporting the building and transferring its weight to the ground. . Types of Foundation. Shallow foundations.

Foundation Systems 52

Foundation Systems Building Design Wall Systems Structural Systems 52

Roads Online

JUNE 18, 2023

The system outlines a process of production and consumption, where waste is minimised by keeping resources within an ecosystem. The general concept of the circular economy consists of three pillars or key focuses: design out waste, keep products or materials in circulation and to regenerate natural systems.

Building Materials Manufacturing 90

Building Materials Manufacturing Infrastructure Development Sustainability Building Materials 90

CivilJungle

FEBRUARY 25, 2021

plate structural system comprising thin Kirchoff plates. Also, Read: Components of Space Frame System | Types of Space Frame | Advantages & Disadvantages of Space Frame Structure | Space Frame Structures Examples. plate structural system comprising thin Kirchoff plates. Frame Analysis-.

Structural Systems 52

Structural Systems Wall Systems Flooring Systems Foundation Systems 52

CivilJungle

JANUARY 1, 2021

Water is the biggest enemy of this structure. It is necessary to remove water from the structure as far as possible to prevent it from any further damages. There are many chances of entering water into the structure but the weep holes function is to pass water through it outside the structure. Weep Holes Definition.

Wall Systems 52

Wall Systems Foundation Systems Structural Systems Painting/finishing 52

CCR Magazine

MAY 28, 2024

It encompasses the upkeep of plumbing and electrical systems – addressing leaks, clogs and faulty wiring – and extends to heating, cooling, and safety systems. Intricate elements like foundation stability, interior, and exterior components come under its purview. Structural repairs come next on the list.

Maintenance 52

Maintenance Property Management Plumbing Systems HVAC Systems 52

CivilJungle

APRIL 30, 2020

Shoring is the construction of a temporary structure to support temporarily an unsafe construction. All forms of shoring are temporary supports applied to a building or structure. These relate to work on structures where there is a perceived risk of accidental collapse and danger to any person on or adjacent to the site.

Wall Systems 59

Wall Systems Flooring Systems Structural Systems Foundation Systems 59

UK Construction Blog

JANUARY 24, 2025

Choosing the right business structure (sole trader, limited company, or partnership) is crucial, with each having distinct implications for taxation and personal liability. Let’s explore the essential steps, practical insights and proven strategies you’ll need to lay a solid foundation for your construction business success.

Insurance Management 52

Insurance Management Construction Equipment Project Management Consulting Specialty Contracting 52

CivilJungle

JANUARY 2, 2022

This roof is looking realistic , and the bright lines of this roof decorate the whole structure. This is naturally protected from the wind by its aerodynamic structure. Also, Read: Monolithic Definition | Monolithic Footing | Monolithic Slab Foundation | Advantages & Disadvantages of Monolithic Slab Foundation | Monolithic Slab.

Roofing Systems 52

Roofing Systems Foundation Systems Building Materials Manufacturing Structural Systems 52

CivilJungle

JUNE 30, 2021

The Soffits and fascia play a vital role in the exterior of the structure. Soffits and fascia are both used for protecting your house as well as gives the same Structure aesthetical look. The soffit is the underlying material that is attached to the exposed overhang of the roof of the structure. Maintenance of soffits.

Piping Installation 52

Piping Installation Roofing Systems Wall Systems Foundation Systems 52

CivilJungle

DECEMBER 27, 2020

The Soffits and fascia play a vital role in the exterior of the structure. Soffits and fascia are both used for protecting your house as well as gives the same Structure aesthetical look. The soffit is the underlying material that is attached to the exposed overhang of the roof of the structure. Maintenance of soffits.

Piping Installation 52

Piping Installation Roofing Systems Wall Systems Foundation Systems 52