CivilJungle

MARCH 2, 2021

Definition Spillway-. Through particular, the spillway consists of an integrated system, a conveyance stream as well as a terminals system, so the first two can be mixed in the very same manner with such forms. In specific, the control system is common to a conveyance channel. Ogee Spillway. Chute Spillway-.

Structural Systems 52

Structural Systems Wall Systems Foundation Systems Plumbing Systems 52

CivilJungle

FEBRUARY 17, 2021

Spandrel Beam Definition-. Throughout the context of tall buildings , masonry walls are typically unable to handle their own weight and the weight of the slab. So the beam is provided with additional walls at each floor level to support the load on the wall and probably some load on the roof as well.

Wall Systems 52

Wall Systems Flooring Systems Foundation Systems Structural Systems 52

CivilJungle

JANUARY 5, 2021

Structural Audit Definition. Also, Read: What Is Pad Foundation | Failure of Pad Foundation | Pad Foundation Detail | Types of Pad Foundation | Design of the Pad Footing Depends on Several Factors. Structural Audit is done in a building in order to evaluate the structural system like frame structure of a building.

Building Performance Measurement 52

Building Performance Measurement Structural Systems Painting/finishing Building Codes 52

CivilJungle

OCTOBER 18, 2021

Then after architect consult with a structural engineer and MEP engineer for details of the reinforcements and other detail for use, how deep your foundation will be, the size of gravel to be used, column width, electrical, plumbing, etc. Foundation. Foundation work is done based on drawings provided by the architect.

Painting/finishing 98

Painting/finishing Electrical Wiring Installation Plumbing Systems Masonry 98

CivilJungle

AUGUST 9, 2020

Topping Slab Definition. Also, read: What Is Plumbing | Systems of Plumbing | Difference Between One pipe, Two Pipe, Single Stack, and Single Stack Partially Ventilated | How to Choose of Plumbing System. Unbonded topping slab allows for the introduction of a radiant system for heating and cooling or ice melting applications.

Flooring Systems 52

Flooring Systems Curing Plumbing Systems Foundation Systems 52

Job Order Contracting

JULY 30, 2024

This work includes regular roof replacement, refinishing of wall surfaces, repairing and replacement of heating and cooling systems, replacing tile and carpeting, and similar types of work. Robust FSRM activities are required to efficiently manage the lifecycle of a portfolio of facilities and associated physical infrastructure.

Sustainability 97

Sustainability Facility Management Schedule Management Change Management 97

CivilJungle

JANUARY 29, 2022

Generally, concrete slabs, concrete foundations , beam, column, wall, roof, etc., Definition of Cast in Place Concrete. Cast in place concrete is a construction technology where building components like walls, slabs are cast at the site by Formwork. Cast in Place Concrete Wall. What Is Cast in Place Concrete?

Concrete Pouring 52

Concrete Pouring Foundation Systems Wall Systems Curing 52

CivilJungle

FEBRUARY 6, 2021

The word Monolithic means “all in a single pour” so in construction where Monolithic Slab is used the foundation is made in one single pour that is made up of a layer of a concrete slab with thicker area under the load-bearing walls and all the edges of the perimeter to replace the footer. What Is a Monolithic Slab?

Concrete Pouring 52

Concrete Pouring Foundation Systems Wall Systems Flooring Systems 52

CivilJungle

MARCH 7, 2021

The Inverted Arch Footing is built in areas where the carrying or bearing capacity of the soil is very low and the load of the building is concentrated on the walls and digging is not possible. This is not a typical type of foundation. Inverted Arch Footing is built between the two foundation walls.

Foundation Systems 52

Foundation Systems Wall Systems Structural Systems Waterproofing Systems 52

CivilJungle

JANUARY 7, 2021

Shotcrete/mortar/spray-concrete is a kind of refined concrete drizzled by gas hose-pipe nozzle at high pressure & velocity on a projectile motion on a prepared wall surface. It is often utilised in tunnels, underground walls, retaining walls, drainage systems & swimming pools for interim support. Shotcrete Wall.

Concrete Pouring 52

Concrete Pouring Fire Protection System Installation Wall Systems Foundation Systems 52

CivilJungle

MARCH 17, 2021

What Is Frost Wall? The Frost wall or frost-protected wall structure is built to keep soil below the building against freezing to secure the foundations in freezing conditions. The Types of frost walls, their specifications, and applications are addressed. They are built deep beneath the frost line.

Wall Systems 52

Wall Systems Foundation Systems Structural Systems Concrete Pouring 52

CivilJungle

APRIL 10, 2022

Micro concrete is a great option to repair the cracks of cement walls at a very less price and weight compared to real concrete. So at the time of revamping the house when walls will be needed to excavate, it will be accessible more. Being a durable material, it can be used on walls and floors. Less Water Demand. Micro Concrete.

Concrete Pouring 105

Concrete Pouring Flooring Systems Waterproofing Systems Wall Systems 105

CivilJungle

JANUARY 20, 2021

The flexbow incorporated in the riser pipe acts as an adjustable valve which serves two purposes, firstly it controls the flow of water and air entering the Well Point system, and secondly it allows others to have a clear view of what is being pimped. A Well Point system consists of several closely spaced shallow wells of small diameter.

Piping Installation 52

Piping Installation Foundation Systems Plumbing Systems Wall Systems 52

CivilJungle

DECEMBER 11, 2020

In this article, you will get to know about the ferroconcrete definition , properties of Ferrocement , the process of Ferrocement Construction , Advantages and Disadvantages of Ferrocement and the uses of Ferrocement in the construction. Ferrocement construction is a type of thin wall which is made up of reinforced concrete.

Steel Fabrication 98

Steel Fabrication Waterproofing Systems Structural Systems Curing 98

CivilJungle

DECEMBER 28, 2020

Also, Read: What Is Soil Vent Pipe | How Does Soil Stack Pipe Works | Soil Vent Pipe Material | Types of Plumbing System. Also, Read: What Are Walls | What Is Interior Walls | Types of Interior Wall Materials | Types of Wall Construction | Types of Load Bearing Wall. Foundation. Braced Frame System.

Concrete Pouring 52

Concrete Pouring Foundation Systems Structural Systems Wall Systems 52

CivilJungle

JANUARY 20, 2021

Introduction of Foundation: Foundation is one of the most important parts of the building. The foundation plays a crucial role in the structure and it is the lowermost part of the building below the ground level which provides a base for the structure. The foundation provides a level surface for the building operations.

Foundation Systems 52

Foundation Systems Structural Systems Wall Systems Painting/finishing 52

CivilJungle

OCTOBER 16, 2021

Generally skirting is a board which is provided in the junction point of the wall and the interior wall throughout its length. This type of skirting is used for various walls like plane walls, patterned walls, textured walls, etc. In light flooring, walls, ceiling works; wooden skirting is used.

Fire Protection System Installation 52

Fire Protection System Installation Roofing Systems Wall Systems Flooring Systems 52

CivilJungle

APRIL 30, 2020

These support walls laterally. Shoring can be utilized when walls bulge out when walls crack due to unequal settlement of foundation and repairs must be carried out to the cracked wall, when an adjacent structure needs pulling down when openings must be newly enlarged or made into a wall. Type of Shoring.

Wall Systems 59

Wall Systems Flooring Systems Structural Systems Foundation Systems 59

CivilJungle

JANUARY 1, 2021

Weep holes are mostly provided in the wing walls retaining walls masonry walls extra to remove water through it. When the structure is constructed above the water table then there will be no chance of accumulation of water behind the wall. Weep Holes Definition. Foundation Weep Holes. Need for Weep Holes.

Wall Systems 52

Wall Systems Foundation Systems Structural Systems Painting/finishing 52

CivilJungle

OCTOBER 24, 2021

What is a Raft Foundation? A raft foundation , also called a raft foundation , is essentially a continuous slab resting on the soil that extends over the entire footprint of the building, thereby supporting the building and transferring its weight to the ground. . Types of Foundation. Shallow foundations.

Foundation Systems 52

Foundation Systems Building Design Wall Systems Structural Systems 52

CivilJungle

SEPTEMBER 26, 2020

Falsework includes the foundations , footings , and all structural members supporting the permanent structural elements. Shorbrace System. Cup-Lock Supporting System. Shorbrace System. The shorbrace support system is used widely to support the bridge deck. This system possesses many merits. Spigot Connector.

Foundation Systems 52

Foundation Systems Structural Systems Roofing Systems Fire Protection System Installation 52

CivilJungle

MARCH 14, 2021

The spread footing is utilized to support the column & walls and additionally to convey & disseminate the load coming to the structure to the soil below it. The base of spread footing is slightly wider than load-bearing foundation base. This is also called a stepped spread foundation. Raft Foundation or Mat Foundation.

Foundation Systems 52

Foundation Systems Concrete Pouring Wall Systems Structural Systems 52

CivilJungle

JANUARY 16, 2021

Bamboo is a natural product which is widely used in the construction of partition walls floorings and ceiling panels and for roofing. Bamboo is widely used for the construction of partition walls and beams which are the main structural elements of any structure. Bamboo defines as a tall tropical plant with hard and hollow stems.

Architecture 69

Architecture Building Materials Roofing Systems Material Handling 69

CivilJungle

SEPTEMBER 28, 2020

A closed abutment is a full-height wall with wing walls on each side that retains the full height of the approach embankment. However, there are several significant disadvantages, especially for high embankments and embankments on soft foundations. Spread footing , pile, or drilled shaft foundations may be used.

Foundation Systems 52

Foundation Systems Wall Systems Structural Systems Construction Equipment 52

Building Radar

AUGUST 8, 2024

Understanding Retrofitting Definition and Overview Retrofitting is the process of upgrading or improving an existing building or structure to enhance its performance or extend its lifespan. As explained by Melbourne VIC , retrofitting can address issues such as outdated systems, structural weaknesses, and compliance with modern standards.

Building Code Compliance 52

Building Code Compliance HVAC System Installation Energy Efficiency Structural Systems 52

CivilJungle

FEBRUARY 5, 2022

Introduction of CMU Wall. The CMU blocks are available in various shapes and sizes in the market and are widely used in the construction of walls of the building. What is CMU Wall? The CMU wall is constructed with the help of standard sizes concrete masonry units. Segmental Retaining wall units. ASTM C1372.

Masonry 52

Masonry Concrete Pouring Wall Systems Building Materials Manufacturing 52

CivilJungle

FEBRUARY 24, 2021

Load Bearing Wall Construction: Load Bearing Wall Construction was most widely used form of construction for large buildings from the 1700’s to the mid 1900’s. Load Bearing Wall Construction is rarely used today in large buildings, but smaller residential buildings are being built. What Is Load Bearing Wall?

Wall Systems 52

Wall Systems Structural Systems Flooring Systems Building Materials 52

CivilJungle

JANUARY 11, 2021

Also, Read: What Is Pad Foundation | Failure of Pad Foundation | Pad Foundation Detail | Types of Pad Foundation | Design of the Pad Footing Depends on Several Factors. Mezzanine Floor System – The girders aren’t single span. End-Wall Framing. Walls – (not presently reduced). #3.

Foundation Systems 52

Foundation Systems Flooring Systems Wall Systems Roofing Systems 52

CivilJungle

MARCH 23, 2021

The pile and the piers are two different types of deep foundations which are widely used in the construction. It is necessary that you should know the difference between a pile foundation and a pier foundation. In this article, you will get to know the difference between the Pier and Pile foundation. What Is Pier?

Foundation Systems 52

Foundation Systems Staircases Structural Systems Wall Systems 52

CivilJungle

JANUARY 11, 2022

During the light rain its consist ventilation system. The louvered window is constructed for a ventilation system and does not permit outside vision from the window. For the good ventilation system to the house, the windows are used. The use of the window provides a house a good air circulation system to the building.

Ceiling Systems 52

Ceiling Systems Flooring Systems Wall Systems Roofing Systems 52

CivilJungle

JUNE 30, 2021

Also, Read: What Is Soil Vent Pipe | How Does Soil Stack Pipe Works | Soil Vent Pipe Material | Types of Plumbing System. The fascia board is the one that is mounted at the point where the roof meets the outer wall of the structure. Fascia closes the gap between the walls and roof by hanging over the walls of the building.

Piping Installation 52

Piping Installation Roofing Systems Wall Systems Foundation Systems 52

CivilJungle

DECEMBER 27, 2020

Also, Read: What Is Soil Vent Pipe | How Does Soil Stack Pipe Works | Soil Vent Pipe Material | Types of Plumbing System. The fascia board is the one that is mounted at the point where the roof meets the outer wall of the structure. Fascia closes the gap between the walls and roof by hanging over the walls of the building.

Piping Installation 52

Piping Installation Roofing Systems Wall Systems Foundation Systems 52

CivilJungle

NOVEMBER 1, 2021

In the construction of the foundation of a structure, we know that water is the life of the foundation. There are have many types of hidden damage by water in the bathroom that’s are, visible mildew , a musty odor, walls, baseboards, and warped flooring. Introduction of Water Damage in the Bathroom. Test Valves.

Flooring Systems 52

Flooring Systems Wall Systems Roofing Systems Plumbing Systems 52

CivilJungle

DECEMBER 26, 2020

Also, Read: What Is Soil Vent Pipe | How Does Soil Stack Pipe Works | Soil Vent Pipe Material | Types of Plumbing System. Also, Read: What Are Walls | What Is Interior Walls | Types of Interior Wall Materials | Types of Wall Construction | Types of Load Bearing Wall. What Is Tort? What Is Contract?

Contracts 52

Contracts General Contracting Foundation Systems Wall Systems 52

CivilJungle

MARCH 8, 2021

Plastering is the practice of coating rough walls including irregular surfaces in the building or houses as well as other buildings with plastic material termed plaster. Therefore it provides a suitable foundation or floor for surface decoration by adding whitewashing, sweeping, painting , and distempering. What Is Plastering?

Painting/finishing 52

Painting/finishing Masonry Wall Systems Ceiling Systems 52

Natural Building

MARCH 30, 2021

I want to use straight and right angle walls to make my first roof framing as basic as possible, and would like to drop a 2×4 / 2×3 roof rafter truss (connected to top plate at side walls and the ridge beam) to allow space for R-30 or R-45. I definitely would like to hear other ideas from the community.

Wall Systems 52

Wall Systems Building Codes Roofing Systems Masonry 52

CivilJungle

DECEMBER 26, 2021

Types of Slip Form System. The Slip form system is categorized into different types that are as follows. Vertical Slip Form System. In the vertical slip form system, the concrete form is surrounded by the platform which is used by the workers to stand and work safely. Cantilever Jump Form Method . Slip Form Technique.

Concrete Pouring 52

Concrete Pouring Wall Systems Structural Systems Lifts 52