UK Construction Blog

MARCH 20, 2025

Key Changes The regulations focus on several areas: Energy Efficiency : New homes must have better insulation and airtightness, potentially with lower U-values for walls, roofs, and windows. Heating Systems : Gas boilers will likely be banned, with a shift to low-carbon options like heat pumps. W/mK or lower.

Energy Efficiency 52

Energy Efficiency Building Performance Measurement Building Standards Health Regulations 52

Construction Marketing

JANUARY 24, 2024

Mechanical and electrical engineers work on systems within buildings, such as heating, ventilation and air conditioning (HVAC) and electrical systems. Conduct safety training and inspections to create a secure work environment. Electricians Install, maintain, and repair electrical systems in buildings and construction sites.

HVAC System Installation 133

HVAC System Installation Electrical Systems Building Code Compliance Structural Systems 133

GCP Applied Technologies

DECEMBER 11, 2018

DUCTILCRETE® engineered slab systems significantly reduce control joints and curling. This helps eliminate the cracks that commonly occur in concrete slabs and alleviates the associated wear and tear on forklifts going over uneven flooring. Verify that the HVAC systems are sited properly. Consider lighting needs.

Maintenance 60

Maintenance HVAC System Installation Fire Protection System Installation HVAC Systems 60

UK Construction Blog

JULY 9, 2024

These surveys provide varying depths of inspection, each tailored to give you a comprehensive view of the property’s condition before you make that significant investment. This includes checking for cracks in walls, floors, or ceilings, which could indicate underlying structural issues.

Surveying 64

Surveying Plumbing Systems Structural Systems Roofing Systems 64

UK Construction Blog

JANUARY 31, 2025

Key Takeaways Damp and rot prevention requires a multi-layered approach, incorporating proper drainage, ventilation systems, and moisture barriers during construction phases. Regular maintenance, including six-monthly external inspections and quarterly internal checks, is crucial for identifying early warning signs of damp and rot issues.

Wall Systems 52

Wall Systems Waterproofing Systems Structural Systems Foundation Systems 52

HardHatChat

APRIL 20, 2010

Don’t work against the existing shopping center floor plans, but evolve them into the new design. Roof systems – depending on their age and how they work into the new plan. Main electrical systems – this includes switch gear, disconnects and meter panels. The base structure – no need to pour a new foundation.

Concrete Pouring 76

Concrete Pouring Electrical Systems Structural Systems HVAC Systems 76

CCR Magazine

JULY 15, 2024

Everything is running smoothly until suddenly, the floor is flooded. Workers scramble to contain the water, production grinds to a halt, and the cause is quickly identified – a failure in the industrial drainage system. Without an efficient drainage system, facilities could face flooding, contamination, and costly shutdowns.

Environmental Impact Assessment 52

Environmental Impact Assessment Safety Regulations Flooring Systems Material Handling 52

CivilJungle

OCTOBER 18, 2021

Floor Slab or Roof Structure. Internal walls are plaster with a smooth finish, and flooring is done with tiles. When the project is complete, the contractor inspects the whole work one by one and make a punch list. While that is going on the roof may be finished up. Floor Slab or Roof Structure.

Painting/finishing 98

Painting/finishing Electrical Wiring Installation Plumbing Systems Masonry 98

CCR Magazine

AUGUST 15, 2024

Regular Inspection Schedules Establishing a regular inspection routine is one of the most effective ways to prevent unexpected repairs and maintain the health of your home. Monthly checks should include testing smoke detectors, inspecting electrical cords for wear, and checking under sinks for leaks.

Fire Protection System Installation 52

Fire Protection System Installation HVAC System Installation Fire Protection Systems HVAC Systems 52

Construction Specifier

JANUARY 31, 2022

Its aluminum-clad exterior was refinished with a polyvinylidene fluoride (PVDF) based coating system, restoring the building’s façade to a just-like-new condition designed to last for over 20 years. A striking, early example of late modern “high-technology” architecture received a 21 st century facelift. Preserving modern history. Conclusion.

Painting/finishing 98

Painting/finishing Historic Preservation Wall Systems Quality Assurance 98

CCR Magazine

AUGUST 28, 2024

Consider factors such as size, style, layout, number of rooms, and special features like outdoor spaces, basements, or energy-saving systems. In addition to your contractor, you may need to work with an architect, an engineer, and subcontractors specializing in plumbing, electrical work, and HVAC systems. </p>

HVAC System Installation 52

HVAC System Installation Electrical Wiring Installation Building Permits Plumbing Systems 52

Construction Specifier

FEBRUARY 4, 2025

So, when it came to specifying the new roofs at the former Walter Reed Medical Center site in Northwest Washington, managing stormwater collection and runoff was a high priority. The first step for installing the green roof was to map out the specific areas on each roof section that would eventually house the growth media.

Roofing Systems 52

Roofing Systems Green Building Facility Management Structural Systems 52

CCR Magazine

OCTOBER 16, 2024

Regular Roof Inspections and Maintenance One of the most crucial elements of weather-proofing your building is maintaining the roof. The roof is your first line of defense against all types of weather, from snow to hail and everything in between. You should regularly check the insulation in your walls, roof, and floors.

Roofing Systems 52

Roofing Systems Foundation Systems Landscaping Inspection 52

UK Construction Blog

SEPTEMBER 22, 2023

Due to the embedded longitudinal and transverse steel reinforcement, it exhibits enhanced strength, making it suitable for various structural elements like roofs and walls. Consequently, the safety and durability of RAAC buildings hinge on regular inspections and maintenance.

Safety Regulations 64

Safety Regulations Building Performance Measurement Building Materials Manufacturing Concrete Pouring 64

Construction Specifier

OCTOBER 5, 2023

The building is constructed with a steel structural frame, with bar joists for support of floor and roof slabs bearing on beams at the exterior wall. In at least one location, the steel had deflected downward a sufficient distance to make contact with and cause distortion of the aluminum-framed window system below.

Masonry 64

Masonry Wall Systems Structural Systems Historic Preservation 64

CCR Magazine

FEBRUARY 7, 2025

Spring and summer bring intense thunderstorms, often accompanied by large hail, which can severely damage roofs, windows, and exterior surfaces. Flooding is another concern, as heavy rainfalls can overwhelm drainage systems, causing water damage to homes, basements, and commercial structures.

Roofing Systems 40

Roofing Systems Structural Systems Inspection Foundation Systems 40

CCR Magazine

MAY 28, 2024

Inspect and Repair Your Roof The roof is your home’s first line of defense against the weather, making regular inspections and repairs crucial. Begin by examining your roof for missing, damaged, or aging shingles that might allow water to seep through and cause structural damage.

Roofing Systems 52

Roofing Systems Material Storage Painting/finishing Waterproofing Systems 52

UK Construction Blog

JULY 1, 2024

Variable rates can jump through the roof during peak hours. Heating and Cooling: HVAC systems use the most electricity. Appliances and Electronics: Fridges, washing machines and entertainment systems add up. Consider the position and size of your roof as these will affect the performance of the solar panels.

Renewable Energy Systems 64

Renewable Energy Systems HVAC System Installation Energy Efficiency HVAC Systems 64

Construction Specifier

SEPTEMBER 5, 2024

Conversations or activity of other occupants, the whirl and beeps of computers and electronic equipment, and the hum of HVAC and mechanical systems all create a cacophony of unwanted sound that is hard to ignore. Hotels, school dormitories, apartments, and condos have the same design element in common—shared walls and floor/ceilings.

Building Performance Measurement 64

Building Performance Measurement Ceiling Systems Project Management Consulting Flooring Systems 64

CCR Magazine

SEPTEMBER 13, 2024

As the Middle Tennessee’s first full-service hotel built in nearly a decade, the eight-story, 244-room Hilton Franklin Cool Springs offers one of the only roof-level patios in town plus a stylish lobby and contemporary guest rooms with Tubelite thermal entrance systems and floor-to-ceiling window wall.

Painting/finishing 52

Painting/finishing Wall Systems Roofing Systems Flooring Systems 52

CCR Magazine

JULY 2, 2024

This phase involves building the skeleton of the structure, including walls, floors, and the roof. Systems Installation: After framing, install essential systems like plumbing, electrical, HVAC, and insulation. Proper installation of these systems is key to the comfort and functionality of your home.

HVAC System Installation 52

HVAC System Installation Painting/finishing Renewable Energy Systems Flooring Systems 52

Construction Specifier

NOVEMBER 27, 2021

Roof Construction in Types I & II Construction. cement board and 100 for untreated red oak flooring. It is subject to third-party inspection and quality assurance. It is subject to third-party inspection and quality assurance. million-sf) panelized roof system using interior FRT lumber and plywood in Phoenix, Arizona.

Fire Protection System Installation 98

Fire Protection System Installation Building Codes Building Materials Manufacturing Fire Protection Systems 98

CivilJungle

DECEMBER 26, 2021

Introduction of Roof Storm Damage Checklist. Generally, a roof is replaced after thirty years; in the real world, there are so many things that can damage your roof and repair , or inspection work is needed. In America, there is a huge problem due to storms where roof repair work is required.

Roofing Systems 52

Roofing Systems Inspection Piping Installation Building Code Compliance 52

BDC Network

NOVEMBER 20, 2023

It allows designers to use smaller, more efficient heating and cooling systems to keep occupants comfortable. It calculates the two-dimensional heat-transfer effects in building components such as windows, walls, foundations, roofs, and doors. That’s a win-win! The King Edward Affordable Housing in Vancouver, British Columbia.

Energy Efficiency 95

Energy Efficiency Building Standards Building Code Compliance Building Design 95

Building Information Management

JUNE 11, 2016

A regularly-scheduled preventive maintenance, mitigates the frequency of unplanned failures, extends the longevity of building systems beyond industry standards, and best suits organization needs for a safe and functional physical environment. Extending the lifespan of building systems. System life-cycle performance.

Maintenance 40

Maintenance HVAC Systems Roofing Systems Building Code Compliance 40

CivilJungle

JANUARY 29, 2022

Generally, concrete slabs, concrete foundations , beam, column, wall, roof, etc., Cast-in-place concrete slabs, concrete foundations, beam, column , wall, roof, etc., Cast in place concrete wall is an exposed civil, structural system. This lateral system includes a shear wall, moment-resisting frame, braced frame, etc.

Concrete Pouring 52

Concrete Pouring Foundation Systems Wall Systems Curing 52

CCR Magazine

NOVEMBER 26, 2024

Smart Thermostat and Security Systems A smart thermostat lets you control your home’s temperature from anywhere, saving on energy bills. Adding a modern security system makes your home safer and more appealing to buyers. Modern Lighting Control Solutions Smart lighting systems add both function and style to your home.

Painting/finishing 52

Painting/finishing Energy Efficiency Roofing Systems Flooring Systems 52

CCR Magazine

JUNE 28, 2024

It generally results from water entering the building through external walls or roofs due to damaged or deteriorated masonry, brickwork, or leaking gutters. Addressing the source of the ingress, such as a leak in the roof or blocked gutter, is essential to fixing penetrating damp. What Are Common Causes of Damp in Houses?

Roofing Systems 52

Roofing Systems Wall Systems Piping Installation Structural Systems 52

UK Construction Blog

APRIL 17, 2025

Too loud, not enough airflow, stuff not passing inspection – you name it. If you dont define the job clearly from the start, youll end up with a one-size-fits-none system that no ones happy with. Ductwork that crosses between fire zones – say, through a wall or between floors – needs to maintain that barrier.

Ceiling Systems 52

Ceiling Systems HVAC System Installation HVAC Systems Safety Regulations 52

CCR Magazine

AUGUST 21, 2023

Make a floor plan to understand what you can fit and where it can go. Prioritize your list and make sure that the most important elements fit into your floor plan. This could mean using marine-grade substrates for cabinets, acrylic for shower walls, or vinyl for flooring. Consider roof vents or a window if possible.

Energy Conservation 52

Energy Conservation Piping Installation Material Storage Plumbing Systems 52

Commercial Construction Blog

MAY 27, 2020

According to Englewood Construction, prepping commercial facilities to reopen should include reviewing mechanical systems and rescheduling missed preventative maintenance appointments (*photo taken pre-pandemic). Check all mechanical systems, identify any problems and make a list of items to address.

Maintenance 52

Maintenance Fire Protection System Installation Fire Protection Systems HVAC System Installation 52

CCR Magazine

NOVEMBER 30, 2023

To achieve this, factory managers and owners need to implement effective strategies that focus on regular maintenance, inspections, upgrades, and proactive measures to address potential issues. Conduct thorough inspections of building structures, roofs, flooring, and walls to detect any signs of wear, corrosion, or damage.

Environmental Impact Assessment 40

Environmental Impact Assessment Safety Regulations Building Performance Measurement HVAC Systems 40

CivilJungle

AUGUST 2, 2022

Heating Ventilation and Cooling Systems. Heating and Cooling System. Water Heating System. Heating Ventilation and Cooling Systems. Heating and Cooling System. Water Heating System. Insulation. Air Retarders. Reduce Penetrations in Walls. Sealing The House. Accessories To Wind. Five-star Rating Appliances.

Energy Efficiency 52

Energy Efficiency Renewable Energy Systems Energy Conservation Electrical Systems 52

CivilJungle

APRIL 13, 2022

Roof condition. Also, inspect the inside and outside of the home and know about every specific thing, like the presence of any tree near the structure because its roots cause a problem in the future for the structure. Inspect fiberglass or plastic containers for cracks, breaks, or damage. Roof Condition. Electrical panel.

Plumbing Systems 52

Plumbing Systems Foundation Systems HVAC Systems Electrical Systems 52

CCR Magazine

OCTOBER 24, 2024

Without regular gutter cleaning , this blockage can lead to significant structural damage, from foundation cracks to roof leaks, costing you thousands in repairs. Protecting Roofs and Eaves Blocked gutters don’t just cause problems at ground level—they can also lead to issues on your roof.

Maintenance 52

Maintenance Foundation Systems Roofing Systems Structural Systems 52

Work Gearz

JUNE 13, 2022

However, there are ways to counteract the cold in your warehouse throughout the winter by insulating the doors and windows, providing adequate shelving, and circulating and zoning heat by installing a heater system. Certain elements, such as the layout of your warehouse, should be considered before selecting the appropriate heater system. 

HVAC System Installation 52

HVAC System Installation HVAC Systems Building Products Distribution Flooring Systems 52

UK Construction Blog

FEBRUARY 26, 2025

Key offerings typically include: Building Materials: Timber, insulation, roofing, flooring, and more, often selected to meet the specific demands of the regions weather and building codes. Ask for product samples or visit physical stores to inspect materials firsthand.

Building Materials Manufacturing 52

Building Materials Manufacturing Building Materials Material Handling Energy Efficiency 52