Construction Specifier

APRIL 22, 2022

Freestanding canopy systems can be specified for numerous project applications, fabricated with a choice of materials, and engineered to meet a range of performance requirements. Integrated into landscape and wayfinding designs, canopy structures cover walkways, designate points of interest, and indicate communal gathering spots.

Structural Systems 98

Structural Systems Steel Fabrication Wall Systems Painting/finishing 98

Civil + Structural Engineer

MARCH 11, 2024

Working with the consultants from the city’s historical commission and the project’s landscape architect, Heinrich and his team began developing a design strategy for the structure. During construction, the historic facade was supported by a heavy steel frame.

Historic Preservation 130

Historic Preservation Building Commissioning Steel Fabrication Building Design 130

Civil + Structural Engineer

OCTOBER 2, 2023

The cadets chose weathering steel, a type of steel with a rusted patina that made the bridge more weather resistant and helped it blend into the natural setting. The cadets chose weathering steel, a type of steel with a rusted patina that made the bridge more weather resistant and helped it blend into the natural setting.

Public Works 130

Public Works Steel Fabrication Historic Preservation Building Design 130

Construction Specifier

AUGUST 22, 2023

The trail was designed by Snow Kreilich Architects; structures designer, Buro Happold; and TEN x TEN Landscape Architecture and Urbanism. The project has a total of nearly 1,000 tons (907 tonnes) of new structural steel, which reinforces angles, walkway frames, and handrails around the curves in the trail. The trail was built in 6.1-m

Steel Fabrication 88

Steel Fabrication Modular Construction Landscaping Architecture 88

Construction Specifier

JUNE 6, 2023

The engineering team behind the project worked to develop, shape, and optimize the curved roof, ensuring its feasibility for fabrication and construction. Using timber in a double-curve roof and a structure composed of hybrid timber/steel trusses, spanning 45.7 m (150 ft), came with its own set of challenges.

Steel Fabrication 105

Steel Fabrication Controls Manufacturing Prefabrication Architecture 105

Civil + Structural Engineer

JULY 27, 2023

Red7Marine has been involved with the project since August 2022 managing the fabrication and installation process, working with Ørsted and its designers. Each structure is purpose-built, bespoke, and specific to the landscape characteristics of each location. km from the shoreline of the RSPB Minsmere Nature Reserve.

Structural Systems 130

Structural Systems Renewable Energy Systems Steel Fabrication Project Management 130

CCR Magazine

APRIL 8, 2025

This framework may be left open or partially covered with lattice, fabric, or climbing plants to provide shade and visual interest. Aluminum and steel are popular metal options, each with its unique advantages and disadvantages. Pergolas can be freestanding or attached to a building, offering flexibility in design and placement.

Maintenance 52

Maintenance Building Materials Manufacturing Steel Fabrication Building Materials 52

Civil + Structural Engineer

JUNE 4, 2024

The steel arch bridge was built to support year-round, multi-use recreational access, including hiking, biking, running, and cross-country skiing. We wanted to complement the natural scenery so that the bridge adds to the landscape. Bernauer’s support includes a donation of $13,000 worth of steel for the bridge, and mentorship.

Historic Preservation 130

Historic Preservation Steel Fabrication Building Commissioning Public Works 130

UK Construction Blog

APRIL 17, 2025

However, the rise of mens safety trainers has changed the landscape of workplace footwear. Most safety trainers feature steel or composite toe caps to protect your toes from impact and compression injuries caused by falling objects or heavy equipment. The difference between trainers and traditional boots is the lightweight design.

Heavy Lifting Transportation 52

Heavy Lifting Transportation Heavy Equipment Manufacturing Steel Fabrication Landscaping 52

Construction Specifier

OCTOBER 1, 2024

Technological advancements in curtain wall design tools, materials, prototyping, and fabrication techniques offer new avenues for achieving these lofty design and performance goals. Defining specific requirements for fabrication samples, mockups, and testing.

Wall Systems 104

Wall Systems Fire Protection System Installation Project Management Consulting Steel Fabrication 104

Construction Specifier

JUNE 6, 2023

The engineering team behind the project worked to develop, shape, and optimize the curved roof, ensuring its feasibility for fabrication and construction. Using timber in a double-curve roof and a structure composed of hybrid timber/steel trusses, spanning 45.7 m (150 ft), came with its own set of challenges.

Steel Fabrication 94

Steel Fabrication Controls Manufacturing Prefabrication Architecture 94

Whirlwind Steel

OCTOBER 17, 2023

Buildings October 17, 2023 by Whirlwind Team The Evolution of Construction: Cold-Formed Steel In the dynamic realm of construction, cold-formed steel (CFS) is emerging as a game-changer. These frames undergo a fabrication and welding process that is both time and labor-intensive.

Steel Fabrication 52

Steel Fabrication Building Materials Manufacturing Building Resilience Building Design 52

Construction Specifier

JUNE 20, 2023

Apart from a weathering steel “rain jacket” on the exterior and concrete flooring, the interior surfaces showcase the natural beauty of exposed wood, eliminating the need for additional finishes or fireproofing. The architect claims it to be Oregon’s first all-wood project.

Fire Protection System Installation 98

Fire Protection System Installation Fire Protection Systems Flooring Systems Electrical Systems 98

BIM & Beam

APRIL 13, 2016

Preparing the Steel Industry for a Connected Future. Updated Autodesk Structural Fabrication Suite helps advance connected BIM-based steel design and construction workflows. The steel industry is transforming in ways not seen since the industrial revolution.

Steel Fabrication 43

Steel Fabrication Building Information Modeling (BIM) Building Design Building Materials 43

BDC Network

MARCH 11, 2024

Stephen Blumenbaum, PE, SE, Walter P Moore Contractors Designers Designers / Specifiers / Landscape Architects Engineers Facility Managers Architects Building Owners AEC Tech BIM and Information Technology Building Tech Structural Materials Steel Buildings Today’s fast-paced world of design and construction is fractured.

Building Information Modeling (BIM) 59

Building Information Modeling (BIM) Steel Fabrication Schedule Management Risk Management 59

Construction Specifier

JANUARY 31, 2022

In fact, officials of New York City are beginning to re-examine its zoning to ensure green spaces and parks are accessible and equitably distributed throughout the urban landscape. Designing a healthier environment is achieved by architects and landscape designers collaborating much earlier on in the process.

Building Design 72

Building Design Building Products Distribution Steel Fabrication Building Resilience 72

Revit OpEd

APRIL 14, 2016

Keep in mind that Shared Coordinates are still very relevant with respect to survey, site and landscape models and drawings. If required, they can also be replaced later with detailed steel connections created using an add-in (see next item). Swap fabrication parts - Use the Type Selector to quickly swap fabrication parts.

Steel Fabrication 75

Steel Fabrication Schedule Management Piping Installation Wall Systems 75

The MCP Group

JANUARY 29, 2024

Bid Due Date | February 22, 2024 2:00 PM Project Description 3-story Existing steel and masonry structure to be rehabilitated into 25 apartments and common area. Trades required include but are not limited to ACM Abatement, Select Demolition, Cast in place concrete, Concrete on decks, masonry restoration, CMU, Structural Steel, Misc.

Steel Fabrication 40

Steel Fabrication Painting/finishing Masonry Carpentry 40

UK Construction Blog

JULY 30, 2024

Sustainability is arguably the most important consideration in the modern construction landscape. Structural Steel Steel is one of the most important materials in sustainable construction. At the end of the building’s useful life, steel buildings can often be transported to a new location, limiting construction waste.

Building Materials 64

Building Materials Sustainability Steel Fabrication Roofing Systems 64

The MCP Group

NOVEMBER 13, 2024

Surveying, earthwork, site utilities, landscaping, lot striping, termite treatment, concrete, stone veneer, masonry, misc. This is a new ground up 3 story wood framed senior living apartment building. We are soliciting subcontractors for the following bid packages.

Geotechnical Engineering 40

Geotechnical Engineering Steel Fabrication Painting/finishing Green Building 40

The MCP Group

FEBRUARY 20, 2023

Will be restored into a 50-unit apartment building. 2021 Addenda Lee-Lofts-Addendum-1-3-6-23 Pre-Bid/Job Walk Information A pre-bid meeting and job walk will be held March 1st, 2023 at 10:00 AM CST.

Steel Fabrication 40

Steel Fabrication Building Permits Carpentry Masonry 40

Work Gearz

NOVEMBER 12, 2020

Steel toe , soft toe and composite ones. Steel toe boots provide better foot protection than the soft toe. When you’re working in a hazardous work environment steel toe boots will protect your feet from the fall of heavy and sharp objects. In this article, we will focus on the comparison of steel toe and soft toe boots.

Steel Fabrication 52

Steel Fabrication Property Management Landscaping Construction Management 52

The MCP Group

DECEMBER 18, 2023

The work includes site demolition, selective demolition, earthwork, erosion control, site concrete, brick pavers, decorative fences, landscaping & irrigation, site utilities, cast-in-place concrete, masonry, stone, stone cleaning, cast stone, structural steel, decorative stairs & railings, architectural woodwork, air barriers, EPDM roofing, (..)

Fire Protection Systems 40

Fire Protection Systems Ceiling Systems Steel Fabrication Wall Systems 40

The MCP Group

AUGUST 14, 2023

Location Pasadena, TX Plans 3 – Bid Set Architectural & Civil Plans Specifications On the plans. 6 – Geotech Report by ECS Southwest, LLP General Information 4 – Bid Set Project Manual MCP Supplemental Conditions.2021 2021 Addenda None at this time.

Fire Protection Systems 40

Fire Protection Systems Carpentry Steel Fabrication Painting/finishing 40

UK Construction Blog

JUNE 12, 2024

Here are some key elements: Eco-friendly materials: Think recycled steel, bamboo, reclaimed wood, and low-VOC (volatile organic compound) paints. Eco-friendly Materials: More Than Just Buzzwords When it comes to materials, there’s a whole world beyond concrete and steel.

Sustainability 64

Sustainability Renewable Energy Systems Energy Conservation Energy Efficiency 64

Construction Specifier

AUGUST 9, 2024

The site is situated on the outskirts of South Mountain Park Preserve, allowing for sweeping views of the diverse desert landscape and surrounding mountain vistas, while maintaining easy access to Arizona State University (ASU) and Phoenix’s Sky Harbor International Airport (PHX).

Architecture 59

Architecture Masonry Steel Fabrication Wall Systems 59

The MCP Group

JUNE 26, 2023

Location Fort Worth, TX Plans 4 – 230616_Echo_Fort Worth,TX – Thru REV 1 Specifications 5 – Echo Fort Worth, TX – SPECS 3 – 230616_Echo_Fort Worth,TX_REV 1 Narrative 6 – ECHO_Ft Worth, TX_COMcheck General Information 1 – Instruction to Bidders 7 – Geotech — Ft.

Fire Protection Systems 40

Fire Protection Systems Carpentry Steel Fabrication Painting/finishing 40

The MCP Group

JUNE 26, 2023

Location Fort Worth, TX Plans 4 – 230616_Echo_Fort Worth,TX – Thru REV 1 Specifications 5 – Echo Fort Worth, TX – SPECS 3 – 230616_Echo_Fort Worth,TX_REV 1 Narrative 6 – ECHO_Ft Worth, TX_COMcheck General Information 7 – Geotech — Ft.

Fire Protection Systems 40

Fire Protection Systems Carpentry Steel Fabrication Painting/finishing 40

Building Radar

JULY 31, 2024

PlanRadar identifies several eco-friendly materials gaining traction, including: Recycled Steel : Utilised for its strength and recyclability, recycled steel reduces waste and energy consumption. Enhanced Quality Control : Off-site fabrication allows for better quality control and precision.

Renewable Energy Systems 52

Renewable Energy Systems Building Materials Manufacturing Building Performance Measurement Energy Efficiency 52

The MCP Group

JANUARY 31, 2024

Location Round Rock, TX Plans 3 – Echo Suites_Round Rock, TX – BID SET COMMENTS_01.26.2024 5 – Echo Suites Round Rock — Civil Plans — 1.15.24 6 – Geotech Revision for Shallow Footing Foundation — Wyndham Echo Hotel – Round Rock — 4.18.23 MCP Supplemental Conditions.2021

Fire Protection Systems 40

Fire Protection Systems Carpentry Steel Fabrication Painting/finishing 40

Natural Building

AUGUST 22, 2022

Now, it struggles to compete with man-made materials like cement and steel to meet immediate issues of urbanization. Unlike fabricated materials, the naturally-grown plant comes in a variety of shapes and sizes, making it difficult to generalize norms and standards around construction methods. mage © Arch-Exist. Image © Eric Dinardi.

Steel Fabrication 52

Steel Fabrication Building Materials Infrastructure Development Building Codes 52

Civil + Structural Engineer

DECEMBER 1, 2023

After consideration from the project team, it was decided to utilize a fabric formed concrete mattress. Albuquerque, New Mexico Project Team : Owner: Bernalillo County, New Mexico Civil Engineer: Bohannan Huston and Molzen Corbin General Contractor: AUI Inc. Construction Management Co.:

Engineering 130

Engineering Fire Protection System Installation Fire Protection Systems Environmental Consulting 130

Natural Building

MARCH 2, 2020

Jaime Inostroza’s “Atalaya Shelter” is rooted in a desire to deeply understand the landscape itself. The shelter will be covered with fabric panels that will amplify the colors of the desert.”. The design sprang into his mind when he first encountered the perfect site for it.

Architecture 52

Architecture Steel Fabrication Building Design Building Materials 52

Work Gearz

JUNE 29, 2020

Timberland PRO Men’s 6″ Pit Boss Steel-Toe. Caterpillar Men’s Second Shift Steel Toe Work Boot. KEEN Utility Men’s Lansing Mid Steel Toe Waterproof Work Boot. Image Brand Title Price Buy Top Timberland PRO Timberland PRO Men's Pitboss 6" Steel-Toe Boot, Brown , 10.5 Size : True to size, 6 inch, 1.5

Steel Fabrication 52

Steel Fabrication Quality Control Controls Manufacturing Landscaping 52

Autodesk Construction Cloud

JULY 31, 2023

Manufacturing for preassembly Since workers will primarily be offsite, they need to possess trade-specific knowledge, as well as know-how in areas like welding, joinery, machine operations, steel fixing, and quality assurance. A background in manufacturing is hugely beneficial, so hire or train your workforce accordingly.

Prefabrication 98

Prefabrication Building Information Modeling (BIM) Modular Construction Building Materials Manufacturing 98

Work Gearz

JANUARY 4, 2022

They have to work with fiber glass, steel bars, pipes and what not and in such conditions it is indeed necessary to wear clothes that cover up all the skin properly so as to prevent minor skin injuries. ACTIVELY COOLS - Wear your shirt with confidence knowing that Arctic Cools HydroFreeze X Fabric keeps you comfortable.

Steel Fabrication 52

Steel Fabrication Land Use Regulations Safety Regulations Painting/finishing 52

Work Gearz

NOVEMBER 17, 2021

Because heat can tire you, heavy fabric will add to your discomfort. They can leave you sweaty, itchy, and even sticky at work, and the heavier the shirt fabric, the longer it needs to dry if there’s a lot of perspiration. A heavier fabric will tend to absorb the perspiration moisture only adding to the shirt’s weight.

Steel Fabrication 52

Steel Fabrication Permits HVAC Systems Controls Manufacturing 52