UK Construction Blog

FEBRUARY 21, 2025

With rising material costs, environmental concerns, and increasing regulations, contractors and developers are searching for ways to build cost-effective yet durable structures. Benefits of Sustainable Masonry Longer lifespan : Masonry structures can last decades or even centuries, lessening the need for costly repairs or replacements.

Masonry 52

Masonry Sustainability Renewable Energy Systems Energy Efficiency 52

Civil + Structural Engineer

OCTOBER 10, 2024

The community chose schlaich bergermann partner (sbp), known for its creative, elegant, sustainable design of long-span bridges and other structures throughout the world. The design illustrates an appreciation for Buffalo’s rich architectural and industrial heritage, coupled with a desire to create an innovative and optimized structure.

Public Works 264

Public Works Foundation Systems Building Design Structural Systems 264

Civil + Structural Engineer

JANUARY 25, 2024

A temporary rider system will be deployed to isolate the works while allowing flows to be maintained. After the pipeline work is completed, a prefabricated GRP discharge chamber will be installed. At the adjacent section, Barhale will repair a 220m length of each main using Cured in Place Pipe (CIPP) relining.

Piping Installation 130

Piping Installation Curing Prefabrication Structural Systems 130

Commercial Construction Blog

MARCH 27, 2018

Prefabricated elements such as pre-cast concrete walls, which Englewood installed for a Blain’s Farm & Fleet store in Romeoville, Ill., Not all that long ago, when I was still a young laborer in the field, many items such as millwork, ductwork and mechanical components were still frequently fabricated on the job site.

Modular Construction 109

Modular Construction Prefabrication Millwork Building Materials Manufacturing 109

CCR Magazine

DECEMBER 20, 2024

As society pushes further into this frontier, the challenges of building structures that can withstand extreme underwater conditions become increasingly complex. Designing for Extreme Pressure The deeper underwater a structure goes, the greater the pressure it must endure.

Structural Systems 52

Structural Systems Building Materials Manufacturing Waterproofing Systems Land Use Regulations 52

Building Radar

JULY 15, 2024

Prefabrication, often referred to as prefab, is revolutionizing the construction industry. In this article, we’ll explore the benefits of prefabrication and how it can enhance construction projects. In this article, we’ll explore the benefits of prefabrication and how it can enhance construction projects.

Prefabrication 52

Prefabrication Building Information Modeling (BIM) Building Materials Manufacturing Controls Manufacturing 52

Construction Specifier

JANUARY 26, 2025

Improving building enclosure performance While energy efficiency might initially suggest well-insulated walls and efficient HVAC systems, controlling air leakage can be just as critical. Uncontrolled air movement through penetrations in the building enclosure can increase energy costs as HVAC systems work harder to condition the air.

Building Code Compliance 64

Building Code Compliance Building Performance Measurement HVAC System Installation Fire Protection System Installation 64

UK Construction Blog

MARCH 4, 2025

Using state-of-the-art CNC machinery and digital controls, today’s stair manufacturers can transform even the simplest sketch into a comprehensive plan tailored to your exact specifications. These advancements allow manufacturers to create complex designs with precision while maintaining structural integrity.

Staircases 52

Staircases Building Materials Manufacturing Engineering Controls Manufacturing 52

BDC Network

MARCH 18, 2024

Emergency departments (ED) remain the overwhelmed gatekeepers—the first point of entry into the healthcare system for people in crisis. this demand for mental health care transcends geography and variations in healthcare delivery systems. A Stantec-designed, two-story modular prefabricated crisis unit.

Modular Construction 105

Modular Construction Structural Systems Prefabrication Building Design 105

UK Construction Blog

MARCH 3, 2025

Drones for Site Surveys and Inspections Thanks to the invention of drones , conducting site surveys and inspections has become so much easier, quicker, safer, and cost-effective to perform. Therefore, they reduce the need for manual site inspections, which, in turn, improves their operational efficiency.

Building Information Modeling (BIM) 52

Building Information Modeling (BIM) Safety Regulations Building Automation Construction Equipment 52

CCR Magazine

MARCH 3, 2025

For developers, business owners, and homeowners, understanding the benefits of design-build is crucial when planning a successful construction project. Permitting applications, material procurement, and preliminary site work can start while the final design is still being refined. In contrast, design-build enables parallel workflows.

Building Design 52

Building Design Building Permits Quality Control Cost Control 52

CCR Magazine

JANUARY 1, 2025

Whether they are leaning on public-private partnership (P3) or traditional delivery methods, owners and developers are recognizing the benefits of wood as a versatile, sustainable, and structurally efficient feature for their projects. Every metric ton of wood used in place of concrete and steel in the structure is estimated to avoid 3.9

Sustainability 52

Sustainability Renewable Energy Systems Environmental Impact Assessment Structural Systems 52

Civil + Structural Engineer

JUNE 1, 2023

Despite being categorized as structurally deficient, the steel truss bridge services 38,000 vehicles—including nearly 7,000 large commercial freight vehicles—daily. The bridge was constructed in 1936 and mounting maintenance costs and disruptions to service have heightened the need to replace the structure. Another $13.1

Historic Preservation 130

Historic Preservation Public Works Building Design Infrastructure Development 130

Civil + Structural Engineer

JUNE 23, 2023

When planning for the project began, keeping the same horizontal alignment of the existing roadway was considered a priority, and maintaining two lanes of traffic on the Texas DOT-designated Hurricane Evacuation Route was a legal mandate. The project contractor, Drewery Construction Co.,

Modular Construction 130

Modular Construction Infrastructure Development Prefabrication Structural Systems 130

BDC Network

JANUARY 2, 2024

The prototype's interior is aligned with lab planning best practices to provide the flexibility needed to accommodate a diverse set of scientific processes. Compared to typical steel and concrete structures – which equate to 15% of worldwide greenhouse gas emissions – mass timber has the potential to reduce embodied carbon by 40%.

Flooring Systems 113

Flooring Systems Structural Systems Building Standards Building Codes 113

Viewpoint Construction Technology

JUNE 20, 2018

percent of bridges are structurally deficient. The FHWA explains three ABC technologies used to construct these bridges: Prefabricated Bridge Elements and Systems: Bridge components built offsite or adjacent to a site and then installed in place. The Benefits and Risks of Prefabricated Bridges.

Prefabrication 84

Prefabrication Risk Management Modular Construction Construction Equipment 84

Civil + Structural Engineer

JUNE 10, 2024

The ongoing street revisions meant that a portion of the building’s footprint on its West side would be in use for Alaskan Way before traffic could ultimately be shifted to the East side of the site.

Concrete Pouring 100

Concrete Pouring Project Management Consulting Surveying Site Planning 100

Autodesk Construction Cloud

DECEMBER 21, 2023

It's a cloud-based model that brings together structured, multidisciplinary data to develop an intelligent model that represents an asset throughout its lifecycle. These dimensions enhance the BIM model and make it more useful throughout the lifecycle of a structure.

Building Information Modeling (BIM) 98

Building Information Modeling (BIM) Schedule Management Environmental Impact Assessment Building Optimization 98

BDC Network

MAY 11, 2023

In the simplest sense, a circular economy is an approach to material lifecycle management guided by three principles: eliminate waste, keep materials in circulation for as long as possible, and regenerate natural systems. These principles are essential, given how construction is estimated to create a third of the world’s waste.

Building Materials 105

Building Materials Building Design Building Resilience Modular Construction 105

Autodesk Construction Cloud

JANUARY 9, 2024

Watch what they have to say: AR and Drone's Impact on the Industry Kelly Barber Division Chief, Systems Management, Pennsylvania Department of Transportation "Some of the biggest construction trends and innovations that we are starting to explore are the use of AR and drones. Prefabricated construction again could help ease labor shortages.

Building Information Modeling (BIM) 137

Building Information Modeling (BIM) Project Management Consulting Building Automation Project Management 137

BDC Network

APRIL 20, 2023

Industrialized construction High-volume off-site construction, prefabrication, and on-site construction automation will continue to advance in response to ongoing labor and material challenges. Wally Ford, Client Executive, Structural 9. Edwin Najarian, Client Executive, Structural 13.

Building Information Modeling (BIM) 98

Building Information Modeling (BIM) Renewable Energy Systems Green Building Building Standards 98

BDC Network

MAY 11, 2023

In the simplest sense, a circular economy is an approach to material lifecycle management guided by three principles: eliminate waste, keep materials in circulation for as long as possible, and regenerate natural systems. These principles are essential, given how construction is estimated to create a third of the world’s waste.

Building Materials 98

Building Materials Building Design Building Resilience Modular Construction 98

Building Radar

JULY 25, 2024

These innovations are significantly enhancing efficiency and safety on construction sites. These 3D models integrate various aspects of the project, including architectural, structural, and MEP (mechanical, electrical, plumbing) elements, into a single platform.

Building Information Modeling (BIM) 52

Building Information Modeling (BIM) Building Automation Building Performance Measurement Modular Construction 52

Roads Online

MAY 22, 2024

It is also designed to make stakeholder engagement and plan changes simple in a controlled environment away from the day-to-day challenges on site. Lowden says the clarity provided by the ADDA software and AUSREO’s services can help to increase the safety and prevent issues arising on site. That all starts with this model.”

Building Information Modeling (BIM) 105

Building Information Modeling (BIM) Infrastructure Development Stakeholder Engagement Change Management 105

UK Construction Blog

MARCH 5, 2024

With their natural beauty and strength, oak beams are used to create structures that are not only sturdy but also aesthetically pleasing. The process of building an oak frame extension requires careful consideration of design and structural requirements.

Building Materials 64

Building Materials Safety Regulations Structural Systems Roofing Systems 64

UK Construction Blog

MAY 29, 2024

Because of the material’s versatility and durability, steel has been a reliable partner for construction companies for years now – playing a huge role in providing structural soundness to buildings as well as aesthetic value. And with that being said, steel construction structures are an important player in the green movement.

Building Information Modeling (BIM) 64

Building Information Modeling (BIM) Building Materials Building Design Green Building 64

CCR Magazine

AUGUST 20, 2024

Traditional building methods can lead to structural instability as the permafrost melts due to the heat generated by buildings. Innovations like the use of reflective materials, advanced cooling systems, and the strategic orientation of buildings to minimize sun exposure have been pivotal.

Engineering 52

Engineering Structural Systems Modular Construction Building Materials 52

CCR Magazine

APRIL 17, 2024

Modular and Prefabricated Construction These techniques are gaining popularity because of their flexibility, cost-effectiveness, and efficiency than traditional construction methods. These systems provide quick deployment, customization possibilities, and less waste during construction. This affects how projects are planned and built.

Integrated Project Delivery (IPD) 52

Integrated Project Delivery (IPD) Building Information Modeling (BIM) Real Estate Development Renewable Energy Systems 52

CivilJungle

JUNE 11, 2021

Automation in Technology is mainly concerned with the application of innovative and computer-based systems to operate and control the overall method of production. All the problems that are associated with construction sites can be overcome by the implementation of automation in the construction industry.

Building Automation 52

Building Automation Steel Fabrication Prefabrication Building Materials Manufacturing 52

Building Radar

JULY 15, 2020

In any case, this is certain: Digitization on the building site and in the offices for planning and administration must and will progress faster. Machine learning allows IT systems to improve themselves by independently “learning” from data using statistical methods. The idea of Building 4.0

Building Information Modeling (BIM) 52

Building Information Modeling (BIM) Building Automation Site Planning Cost Control 52

UK Construction Blog

FEBRUARY 17, 2025

As technology advances at a breakneck pace, healthcare facilities must adapt to accommodate increasingly sophisticated machinery and systems. The Rise of Integrated Systems Another significant trend is the move towards integrated healthcare systems.

Construction Equipment 52

Construction Equipment HVAC System Installation HVAC Systems Modular Construction 52

Trekker Group

SEPTEMBER 13, 2022

Shoring is a temporary structure that offers support to an unstable environment during a construction project. Fixing bulged walls, repairing cracked walls, pulling down an adjacent structure, and making openings in a wall are just a few other reasons for the use of shoring. meters to 5 meters).

Wall Systems 52

Wall Systems Concrete Pouring Structural Systems Prefabrication 52

CCR Magazine

APRIL 15, 2024

Safety Protocols Recent years have underscored the importance of safety on construction sites. Use of Prefabricated Materials The use of prefabricated materials is revolutionizing the construction timeline, allowing projects to be completed faster than ever.

Building Information Modeling (BIM) 52

Building Information Modeling (BIM) Real Estate Development Renewable Energy Systems Environmental Impact Assessment 52

cnstrctr

AUGUST 3, 2019

Because I was new I had no idea was this crucial element to the building life safety systems were. Through my investigation I discovered that firestopping can be a range of materials that are installed in joints within walls, ceilings and floors that have a fire rating to slow the spread of fire throughout a structure.

Fire Protection System Installation 92

Fire Protection System Installation Fire Protection Systems Building Materials Manufacturing Piping Installation 92

CCR Magazine

JUNE 13, 2024

Green Building Practices Sustainability continues to be at the forefront of commercial construction , with an increased focus on eco-friendly building materials, energy-efficient systems, and sustainable designs. By prefabricating these sections, projects experience significantly reduced construction times and minimized on-site waste.

Building Information Modeling (BIM) 52

Building Information Modeling (BIM) Building Materials Manufacturing Energy Efficiency Building Automation 52

UK Construction Blog

DECEMBER 5, 2023

Mitigating cost increases requires understanding material price factors and planning ahead in order to capitalize on new opportunities sustainably. This necessitates strategic planning from contractors to lessen inflation’s impact on their projects.

Building Information Modeling (BIM) 64

Building Information Modeling (BIM) Building Materials Manufacturing Cost Control Building Materials 64

UK Construction Blog

JUNE 6, 2023

Ever wondered how concrete structures maintain their shape and strength during construction? As we dive into the various types of shuttering materials and techniques, prepare to be amazed by the innovative systems that enable complex and unique structures to come to life.

Steel Fabrication 52

Steel Fabrication Structural Systems Wall Systems Concrete Pouring 52